martyrobertsdj

iTrader: (1)

Can anyone help me with the connections for a HKS Fuel Cut Defenser which I'd like to fit to my 1998 UK Impreza?

The instructions which came with it are all in Japanese!!!

I think I've managed to identify the ECU connection drawing which comes in a little book. It would seem to be an "F16" connection drawing.

The ECU has the following info on it:

8S 22611 ADI 90 A18-000 D37 8603

All I need really is to know which of the four wires from the FCD, go where????

Any help very much appreciated.

Cheers,

Marty

Delboy2

Normally +12vdc, Ground(Negative) , Map sensor Output to ECU wire then requires cutting and the other 2 FCD wires connected in series between the cut ends (FCD out will connect to wire on ECU side and FCD in will connect to wire from Map sensor)

Cheers

martyrobertsdj

iTrader: (1)

Delboy,

Yeah....I got that far with the diagrams supplied, but what I can't fathom is which is the actual wire from the MAP to the ECU......which one to cut into?

Cheers,

Marty

Delboy2

If you download THIS and look on page 59/60 the pinout for a 97/98 ECU is shown

Cheers