O2 sensors
#1
Scooby Regular
Thread Starter
Join Date: Feb 2005
Location: glasgow
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensors
Can somebody conirm this is the case or not
Before the turbo on the drivers side is an O2 sensor with 3 wires After the turbo is another O2 sensor with 4 wires The extra wire being the heated element
Is this desc correct? ,why are they different and whats the best one to take a output feed from for the AFR meter
Cheers Grant
Before the turbo on the drivers side is an O2 sensor with 3 wires After the turbo is another O2 sensor with 4 wires The extra wire being the heated element
Is this desc correct? ,why are they different and whats the best one to take a output feed from for the AFR meter
Cheers Grant
#2
Scooby Regular
Join Date: Nov 2002
Location: Market Harborough Leic
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
Take the AFR wire from the white wire near the boost solinoid, but also make sure you earth it back to battery earth, well thats what my instruction said or
http://www.mrtrally.com.au/performance/docs/WRX-V5.pdf
and go to page 33 and it tells you to splice into wire 21 on connector B136.
But again make sure you earth it back to TRUE earth ie battery.
http://www.mrtrally.com.au/performance/docs/WRX-V5.pdf
and go to page 33 and it tells you to splice into wire 21 on connector B136.
But again make sure you earth it back to TRUE earth ie battery.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM