APEXI AFC
31 March 2004, 01:28 AM
#2
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
I'd say beware that you do not alter the ignition timing too much by adjusting the airflow signal !
The airflow signal is not only used for setting fuel input but also the ignition advance.
Andy
The airflow signal is not only used for setting fuel input but also the ignition advance.
Andy
31 March 2004, 07:31 PM
#5
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Athens Greece
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Hi little'un.
I am trying too find some basic info to setup the unit.
I take the AFC from a friend and i only have instruction for installation.
I am trying too find some basic info to setup the unit.
I take the AFC from a friend and i only have instruction for installation.
Trending Topics
31 March 2004, 08:02 PM
#8
Scooby Regular
iTrader: (9)
Join Date: Oct 2003
Location: InTheSticks
Posts: 6,120
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by skydiver
Great for start. Thanks 
Any other advice ?
Any other advice ?
31 March 2004, 08:57 PM
#9
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Skydiver - I'd recommend you get an uprated fuel pump and adjustable regulator, then you can increase/decrease the fuel pressure as required then adjust the MAF signal to achieve the correct timing via the S-AFC
Andy
Andy
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mister:E
Subaru Parts
2
24 September 2015 01:37 PM