What lambda fro MY93 WRX ?
#1
Scooby Regular
Thread Starter
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Apparently there are three or four different types of lambda sensor available for a MY93 wrx. I know it is a 3 wire one but is a platinum one or zirconia one that I need? Apparently they give different readings.
#3
On my MY95WRX 5 door, it is the 3 wire type on a long loom, attached to the headers.
I got the part from a subaru dealer who ordered it from japan - the part no was:-22690AA260. On the sensor itself,says BOSCH A24-6412093X020.
It took 3 weeks to arrive - delivered for £135 including vat. Graham goode tried to charge me £280 for the same part.
You can buy the UK version (short loom) from BRD but will obviously need to splice your existing cable an fit a connector, otherwise the cable will not reach the headers.
The other thing you can do is if you run a decat downpipe which has a blanking plug in place, is remove it anf fit the lamda in there which is what subaru did on the later model cars.
I got the part from a subaru dealer who ordered it from japan - the part no was:-22690AA260. On the sensor itself,says BOSCH A24-6412093X020.
It took 3 weeks to arrive - delivered for £135 including vat. Graham goode tried to charge me £280 for the same part.
You can buy the UK version (short loom) from BRD but will obviously need to splice your existing cable an fit a connector, otherwise the cable will not reach the headers.
The other thing you can do is if you run a decat downpipe which has a blanking plug in place, is remove it anf fit the lamda in there which is what subaru did on the later model cars.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
M4RKG
General Technical
3
30 September 2015 07:51 PM
Sub-Subaru
General Technical
1
28 September 2015 12:47 PM