How do I fit an HKS SSQV without the kit???
#1
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: The home of the game played with odd shapped balls
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
I've got and HKS ssqv and the flange part (above), but not the actual fitting kit. and wanted to see what people have done to fit these to my MY 95 with a later Straight TMIC.
As I can't get hold of a fitting kit seperatly I plan to weld the flange to a section of tube and get some silicon hose to connect it all up. Can I use any diameter of Tube and hose to fit it or does it need to be a certain size for the pressures invovled?
[Edited by Krade - 1/13/2004 11:57:52 AM]
#2
hello
fiited 1 2 my 95 wrx, i left the old dump valve in its position, and blocked the other end, then took a small samco hose from a baileys dump valve, attached to HKS BOV and attached to where the old valve was connected
if this sounds chineese, let me know, i'll lokk in my engine but its possible 4 defo
g.luk
fiited 1 2 my 95 wrx, i left the old dump valve in its position, and blocked the other end, then took a small samco hose from a baileys dump valve, attached to HKS BOV and attached to where the old valve was connected
if this sounds chineese, let me know, i'll lokk in my engine but its possible 4 defo
g.luk
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM