Bob should be along to answer this hopefully

 

I could also answer your question, as I've done a few.

It is possible to do so and I did make quite some gains mainly at high revs. After 5500 RPM you can make a massive difference as the boost drops to almost standard boost in the PPP car. The PPP cars also tend to overboost, this can be cured also with a custom remap.

The customers were very happy, as most of my customers are....

Mark.

 

could get shot of the PPP ECU on here in return for cash+ a standard STi8 ECU, then get that ECU re-mapped. Wont cost you as much then

 

Hi, indeed the answer is yes however its a start from scratch job, as Mark has ststed there are v good gains to be made at the mid top end dependant on mod state of course. Boost to 1.45 mid range and held 1.25 above 6000 rpm is fine.

 

.

[Edited by EMS - 1/7/2004 10:23:00 PM]

 

I like it a bit more conservative.....



Mark.

[Edited by EMS - 1/7/2004 10:21:21 PM]

 

Mark ... be brave .... lol


bob

 

Mark.

 

bob
is it possible to do it on a ppp uk300??

 

The UK300 PPP is an MY01 ECU with a piggy back style chip for the PPP. If you remove this piggy back board the ECU can be mapped as above. Best to sell your ECU and replace with a standard ECU before hand.

Nathan..

 

Lol at Bob, now I know why my cars so quick

Looking forward to being brave with the next

Nathan..

 

CHEERS M8Y