afr meter
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
I was given an afr meter and am going to fit it to my bugeye on the bugeye the lamba sensor is a 4 wire item 1+,1-, and 2 signal wires the lamba meter I have been given only has 3 wires 1+,1- and 1 signal wire does it matter which signal wire on the lamba sensor I tap into or is it better tapping in at the ecu,if so which wire is it and on which block.
cheers
gus
cheers
gus
#2
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
Go to the ECU if I were you. I thought there was only one signal, and the other was a 2nd earth? probably wrong, but use the ECU signal wire anyway. Its easy to get to.
MB
MB
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Mark thanks for that.I have fitted a scoobysport cell fix unit is the 02 sensor wire which goes into the cell fix the same as the one from the lamba sensor???
Thread
Thread Starter
Forum
Replies
Last Post