Intend doing an interim oil and filter change soon on my STi8 and would like any info on the undertray removal procedure. My 99my was simple enough with four bolts, a couple of screws and two clips, but I would like some prior knowledge of where the various attachment points are on the new car.
Cheers JohnD

 

John,similair to the old model,3x12mm nuts along the front of the tray with 4 x plastic push in fixings also, 2x12mm nuts at the rear of the tray and 2 x plastic clips at the back which attach the front tray to the gearbox tray.

Zippy

 

Cheers for that.
As it's a case of jack-up, axle stands and therefore not much space to work, I don't want to slither around underneath wondering why the thing won't drop when there's still those push-in things to release!
JohnD

 

GOOD ON SUBARU TO SUPPLY A FLAP FOR THE DRAIN PLUG BUT NOT THE FILTER