Timing belt
15 April 1999, 11:48 AM
#4
Scooby Regular
Join Date: Jan 1999
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Sjaak, If you can sen dme a SAE from yourslef, I will mail you the pag (as our scanner is not working);
My address is:
Mark Dawes
10 Barnes Close
Hadleigh
Ipswich
Suffolk
England
IP7 5NN
My address is:
Mark Dawes
10 Barnes Close
Hadleigh
Ipswich
Suffolk
England
IP7 5NN
16 April 1999, 08:23 PM
#5
Scooby Newbie
Join Date: Apr 1999
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Please E-mail me with your engine code
e.g EJ-20
If it is an EJ-20, be sure to replace the auto-tensioner and if you can afford it, the waterpump too. Remove, clean and very carefully check the tensioner carrier for signs of cracks or fatigue. Hold a long flat blade screw driver to your ear, spin an listen closely to ALL jocky wheels. Remove and replace rough bearings if ness. Only buy factory to sub timing belt (or gates brand) as these both have the lines on them that you will need to be 100% sure of your cam timing, remmber there are four cams.
Please feel free to E-mail my for any advice or specs (fuel mitures etc).
My address is impreza1@ihug.co.nz
e.g EJ-20
If it is an EJ-20, be sure to replace the auto-tensioner and if you can afford it, the waterpump too. Remove, clean and very carefully check the tensioner carrier for signs of cracks or fatigue. Hold a long flat blade screw driver to your ear, spin an listen closely to ALL jocky wheels. Remove and replace rough bearings if ness. Only buy factory to sub timing belt (or gates brand) as these both have the lines on them that you will need to be 100% sure of your cam timing, remmber there are four cams.
Please feel free to E-mail my for any advice or specs (fuel mitures etc).
My address is impreza1@ihug.co.nz
Thread
Thread Starter
Forum
Replies
Last Post