where can i go for more power? MY01 WRX
#1
current mods are as follows, how mouch more power & what do people recommend, bigger turbo fuel pump fmic etc etc or should i hava coke & a smile & shut the f8ck up? & enjoy as is?
Scoobysport up pipe and down pipe.
TSL centre and back box.
ITG Panel Filter
Scoobysport ECUTek 3
New Brembo Front calipers / Brembo grooved discs / Brembo fast road pads.
Eibachs Springs and PowerStation geometry settings.
Forge VTA dump valve
[Edited by met - 9/16/2003 11:35:31 PM]
Scoobysport up pipe and down pipe.
TSL centre and back box.
ITG Panel Filter
Scoobysport ECUTek 3
New Brembo Front calipers / Brembo grooved discs / Brembo fast road pads.
Eibachs Springs and PowerStation geometry settings.
Forge VTA dump valve
[Edited by met - 9/16/2003 11:35:31 PM]
#2
If you need more BHP then your choices are bigger fuel pump, injectors and Turbo to start with and then another re-map, but i would agree with your final comment 'Shut the f#ck up and enjoy'they are plenty fast enough with your mods, the de-cat and Ecutek are the ones to have.
Zippy
Zippy
#3
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
Met
As Zippy says, the next steps are bigger turbo, fuel pump, fuel pressure regulator and, on the WRX, bigger injectors.
With this spec, we get 340bhp with a front entry TD05 and 380 is possible with an SR40 turbo and front mount IC.
As Zippy says, the next steps are bigger turbo, fuel pump, fuel pressure regulator and, on the WRX, bigger injectors.
With this spec, we get 340bhp with a front entry TD05 and 380 is possible with an SR40 turbo and front mount IC.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM