I'm not sure which one ont the tele leg is the presure sensor on my 95 wagon. Any got a photo or explain by the colour. Thanks.

 

bttt

 

The pressure sensor is the black plastic sensor, it has 3 wires going to it with a connector and a vacumn pipe that comes from an orangey/brown solenoid. If you are getting a CEL with a code for this it is normally down to a leak or break in the vacumn pipe from the manifold to the solenoid. Do you have a Fuel cut raiser?? if so it may be set too high..

Rob

 

Left arrow is the pressure sensor
Top arrow is the Pressure exchange solenoid
bottom arrow is the boost solenoid

Rob

 

Thank you Rob.
That has been a great help.
Thank's again, Simon.