Air Con fitting & parts
#1
Scooby Regular
Thread Starter
I have a UK MY00, will a Jap MY95 WRX Air Con fit in my car with no major hassle, parts wise
I believe I need all these bits
Compressor and mounting bracket
Front Radiator and Fan
Receiver drier (unsure of what this looks like)
Relays "4 from fuse box and poss. 1 from drivers bulkhead"
Pipe work 2 x low pressure and 2 high pressure plus clips
Bulkhead pipe grommet
Internal matrix drain pipe
Internal matrix and temperature sender
Dash switch
Air con Belt
Nuts and Bolts
Also is it a full dash out job, or just the centre console bit
Cheers
Steve
I believe I need all these bits
Compressor and mounting bracket
Front Radiator and Fan
Receiver drier (unsure of what this looks like)
Relays "4 from fuse box and poss. 1 from drivers bulkhead"
Pipe work 2 x low pressure and 2 high pressure plus clips
Bulkhead pipe grommet
Internal matrix drain pipe
Internal matrix and temperature sender
Dash switch
Air con Belt
Nuts and Bolts
Also is it a full dash out job, or just the centre console bit
Cheers
Steve
#3
I think Jollygreenmonster is stripping his out of a MY96 ( ish ) scooby, and on the thread someone kindly provided a FULL list of all the parts needed. Do a search and you should find it, it probably was recent.
http://www.scoobynet.co.uk/bbs/threa...hreadID=233065
edited for URl addition!
[Edited by vulnax999 - 7/28/2003 11:11:08 PM]
http://www.scoobynet.co.uk/bbs/threa...hreadID=233065
edited for URl addition!
[Edited by vulnax999 - 7/28/2003 11:11:08 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM