Remote LEDs for knocklink
#1
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: Scotland
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
When I get round to fitting a knocklink I want to hide the big ugly box away and make a much more discrete LED display for it.
Are the LEDs used standard ~2V items, and what colour is the big one? Am I right in saying the first 4 are 2 green, 1 yellow, 1 red?
Finally is it quite easy to add the connections onto the board, simply connecting the new LEDs up in parallel?
Cheers.
Are the LEDs used standard ~2V items, and what colour is the big one? Am I right in saying the first 4 are 2 green, 1 yellow, 1 red?
Finally is it quite easy to add the connections onto the board, simply connecting the new LEDs up in parallel?
Cheers.
#2
Easiest thing to do is just remove the board & stuff from the box, find a convenient bit of the dash/pillars & drill a hole in them in the right places
Unless you don't want to destroy anything in which case you may have a point...
Unless you don't want to destroy anything in which case you may have a point...
#3
#5
I got it from jamie at JWRacing. Didn't fancy an a-pod one myself but when I saw this one I quite liked it and it does seem very well made. They come in 1,2 or 3 pod I believe. the web site is www.j-w-racing.com
#7
Scooby Regular
Thread Starter
Join Date: Jun 2002
Location: Scotland
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
Nice one, so the big one is "big red" then... kinda obvious what colour
Might just go for big blue though cos blue LEDs seem to be bloody distracting for some reason, even more than red!
Might just go for big blue though cos blue LEDs seem to be bloody distracting for some reason, even more than red!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM