Notices
General Technical
Sponsored by:
Sponsored by: CARiD

whats wrong.....help

Thread Tools
 
Search this Thread
 
Old Jun 25, 2003 | 05:58 PM
  #1  
iffy's Avatar
iffy
Thread Starter
Scooby Regular
 
Joined: Apr 2003
Posts: 41
Likes: 0
Angry

HI,
My 93WRX isnt accelerating as well as it should, im only hitting 56mph at 5000rpm in 3rd! firstly i thought it was the clutch, but it doesnt smell or judder and the bite is still halfway, so i decided to get it checked out before i part with some serious cash. I got it back from the garage who could only find one fault with the canister valve. They say the clutch and the turbo seem fine. Does anybody have any suggestions as to what it might be before i put it on a rolling road.

Thanks
Reply
Old Jun 25, 2003 | 07:42 PM
  #2  
iffy's Avatar
iffy
Thread Starter
Scooby Regular
 
Joined: Apr 2003
Posts: 41
Likes: 0
Post

any ideas anybody??
Reply
Old Jun 25, 2003 | 09:33 PM
  #3  
Fantom's Avatar
Fantom
Scooby Regular
 
Joined: Aug 2002
Posts: 2,570
Likes: 0
From: Wickford, Essex - GamerTag - lCE
Post

spark plugs ok?
what does it feel like? does it judder or feel restricted? it must feel pretty ****ed if its only doing 60 in 3rd
Reply
Old Jun 25, 2003 | 10:27 PM
  #4  
iffy's Avatar
iffy
Thread Starter
Scooby Regular
 
Joined: Apr 2003
Posts: 41
Likes: 0
Post

it feels restricted. its the same in all the gears
Reply
Old Jun 25, 2003 | 10:50 PM
  #5  
mark@wrx's Avatar
mark@wrx
Scooby Regular
 
Joined: Sep 2002
Posts: 2,616
Likes: 0
From: Cumbrian Scoobs
Post

Sounds like a problem I had. Basically the car was detting and the engine was retarding the boost. I took off my induction kit and this seemed to sort the problem. Still get it from time to time though.
Reply
Old Jun 26, 2003 | 12:19 PM
  #6  
Charlie H's Avatar
Charlie H
Scooby Regular
 
Joined: Apr 2000
Posts: 1,376
Likes: 0
Post

Have you tried connecting the diagnostic leads under the dash? I have a 93wrx that was holding back and when I checked the codes I found the boost solenoid wasn't working properly and had reduced my boost to safe mode levels (0.5bar) I cleaned it out with brake cleaner and now the levels are back up to 0.7/0.8. I also had a leaky intercooler pipe which was also causing my problems until I swapped them for samco ones.

Do a search as there has been some recent threads on the diagnostic codes and how to find them or if you want, mail me offline and I'll talk you through it

Found this link which should help

[Edited by Charlie H - 6/26/2003 12:24:21 PM]
Reply
Old Jun 26, 2003 | 08:31 PM
  #7  
iffy's Avatar
iffy
Thread Starter
Scooby Regular
 
Joined: Apr 2003
Posts: 41
Likes: 0
Unhappy

I have connected my diagnostic leads and its come back no fault. Any other ideas?
Reply




All times are GMT +1. The time now is 07:50 AM.