intercooler Y piece hose
#1
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
today/yesterday i bought a samco turbo hose kit for my car, i have fitted most of the hoses and i have 2 left, i have checked the samco part numbers and the box of bits i was given coresponds to the wrx sti, mine is not a sti
now its ovb to me im missing the Y piece from under the cooler, but apart from that the rest of the bits are the same, now
does the sti have a metal Y piece under the cooler?, these 2 hoses i have left look as if they replace the bendy flexi bits of the standerd wrx pipe, i am planning to cut of these horrible bits and slide the samco bits over then refit the plastic Y piece
does the sti have a metal one?
has anybody been in this boat?
i did a bit of mearsureing quickly and it looks like if i cut of them horrible flexi bits the samco pipes i have left will slide over and tighten up, what sort fo pipeing is under the version 4 sti intercooler for example?
now its ovb to me im missing the Y piece from under the cooler, but apart from that the rest of the bits are the same, now
does the sti have a metal Y piece under the cooler?, these 2 hoses i have left look as if they replace the bendy flexi bits of the standerd wrx pipe, i am planning to cut of these horrible bits and slide the samco bits over then refit the plastic Y piece
does the sti have a metal one?
has anybody been in this boat?
i did a bit of mearsureing quickly and it looks like if i cut of them horrible flexi bits the samco pipes i have left will slide over and tighten up, what sort fo pipeing is under the version 4 sti intercooler for example?
#2
Scooby Regular
Yes the STIs come with metal a Y piece.
Is the plastic pipe your going to cut down stiff enough to take a jubilee clip with out collapsing?
I'd take it all off again and send it back for the right kit
Is the plastic pipe your going to cut down stiff enough to take a jubilee clip with out collapsing?
I'd take it all off again and send it back for the right kit
#3
The same happened to me, you got the wrong set there!!
You mention your car is a WRX, meaning new age WRX or version 1 to 6 WRX?
I have a MY99, equals to a WRX ver 5 or 6 in Japan and got the set for the ver 5,6 STI, which is not the same as the regular ver 5,6 WRX's.
The STI kit consists of 4 pieces, the normal WRX is 3 pieces also including he large Y-piece...
You mention your car is a WRX, meaning new age WRX or version 1 to 6 WRX?
I have a MY99, equals to a WRX ver 5 or 6 in Japan and got the set for the ver 5,6 STI, which is not the same as the regular ver 5,6 WRX's.
The STI kit consists of 4 pieces, the normal WRX is 3 pieces also including he large Y-piece...
#4
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
its a 97 wrx
do u think the plastic hose wont be able to take a jublie clip?
it looks pretty strong, from what i can see the weak parts would be the bendy flexi bits, that this hose should replace?
i could take it back, but checking prices means ill probably have to pay another £20ish or so for the "proper" kit :s
do u think the plastic hose wont be able to take a jublie clip?
it looks pretty strong, from what i can see the weak parts would be the bendy flexi bits, that this hose should replace?
i could take it back, but checking prices means ill probably have to pay another £20ish or so for the "proper" kit :s
#5
Scooby Regular
are you wanting to just keep the OEM plastic y-piece hose with your new Samco hoses?
If so forget it. The benefit from the Samco hoses is you're replacing the cr@ppy plastic OEM hose with a more rigid one.
The others are not that important IMHO (possible the DV one is a close 2nd).
Send it back and get the proper kit. Did you not tell the supplier which car model you had? if so, then I'd blame them for sending you the wrong one and they shouldn't charge you for a swap.
Stefan
If so forget it. The benefit from the Samco hoses is you're replacing the cr@ppy plastic OEM hose with a more rigid one.
The others are not that important IMHO (possible the DV one is a close 2nd).
Send it back and get the proper kit. Did you not tell the supplier which car model you had? if so, then I'd blame them for sending you the wrong one and they shouldn't charge you for a swap.
Stefan
#6
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
well i fitted the hoses with the standerd Y piece anyways and it doesnt work lol
the plastic is pretty strong, until its heated up by the turbos gas speed etc etc
then it goes soft and blows the pipes off lmao
ohh dear
ok
does this sti Y piece fit the standerd striaght intercooler?
anybody got a price on them?
anybody got one?
how much is a standerd plastic Y piece (so i dont miss the NBO)
cheers
the plastic is pretty strong, until its heated up by the turbos gas speed etc etc
then it goes soft and blows the pipes off lmao
ohh dear
ok
does this sti Y piece fit the standerd striaght intercooler?
anybody got a price on them?
anybody got one?
how much is a standerd plastic Y piece (so i dont miss the NBO)
cheers
#7
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
hmmm
i may have "fixed" this problem with the help of B&Q
driving home i saw 1.35 bar boost initaly b4 it settled on 1.1 bar
im thiking by removing them horrible flexi bits from the Y piece its raised the boost level a touch?
i may have "fixed" this problem with the help of B&Q
driving home i saw 1.35 bar boost initaly b4 it settled on 1.1 bar
im thiking by removing them horrible flexi bits from the Y piece its raised the boost level a touch?
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
it probably will
but the bits you need are on my car
i didnt want to change the bits i have for a massive silicone y peice as i am planning to get the sti parts in the future
bahh can u bring the plastic one to the NBO for me?
thanks
but the bits you need are on my car
i didnt want to change the bits i have for a massive silicone y peice as i am planning to get the sti parts in the future
bahh can u bring the plastic one to the NBO for me?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM