Hi any one know what a version 1 sti ,jap build 0- 100 model shold be, is it the same as a normal sti 16 psi as mine is going to 10 psi and holding 9, also how can the boost be set to a higher pressure, thanks

 

any one know the std boost for a version 1 sti

 

exesspeed -

Understand, that there are very few (comparitive) STI 1 cars out there, and that as STI changed the ECU, the probablities of a "standard" boost level are slim. I know of slight variances in the engines in the STI, depending on what STI were attempting to do with the engines, so it wouldn't surprise me if the mapping was being changed during the runs.

IIRC, a standard MY94 WRX runs roughly 1.0 bar, most STI 1's I've seen/heard of run slightly more. My own standard one, apart from a decat, runs 1.3.

Hope this helps

 

THANKS IT DOES HELP

 

the 94 WRX(240ps) runs 0.7 bar standard.

as far as i know the sti 1(run of 100 cars) runs 0.9 bar(250ps)

there was 2 runs of sti 1 though, one of 100 cars and one of 200 cars.