Apexi AFC
#1
Scooby Regular
Thread Starter
Join Date: Jan 2002
Location: Chairman of Scoobycity
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I've just brought one of these and although installation was fairly straight forward I'm not sure what senor number to put it on.
The setting in question is found by selecting sensor type in the etc menu then after you select Hotwire it asks you to enter sensor number in and out.
Thanks in advance...
The setting in question is found by selecting sensor type in the etc menu then after you select Hotwire it asks you to enter sensor number in and out.
Thanks in advance...
#2
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
You will have to see what type of TPS sensor you have.
Once you have wired it in switch the AFC and put it on to monitor throttle position..
Now press the throttle, if the display matches the throttle press then it is set to the right sensor no., iirc it is 2..
If not, change it over to the next sensor no.
When you set the sensor no. you also have an arrow which can face up or down, this must also be changed by checking that the throttle position matches the display if it is the wrong way (ie. facing up) then teh throttle may show 100% when the throttle is untouched..
Rob.
Once you have wired it in switch the AFC and put it on to monitor throttle position..
Now press the throttle, if the display matches the throttle press then it is set to the right sensor no., iirc it is 2..
If not, change it over to the next sensor no.
When you set the sensor no. you also have an arrow which can face up or down, this must also be changed by checking that the throttle position matches the display if it is the wrong way (ie. facing up) then teh throttle may show 100% when the throttle is untouched..
Rob.
#3
Scooby Regular
Thread Starter
Join Date: Jan 2002
Location: Chairman of Scoobycity
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Sorry mate, Its the Airflow sensor I need. The throttle sensors working fine.
I know they're definitly hotwire on Impreza's just don't know the in and out number to select.
I know they're definitly hotwire on Impreza's just don't know the in and out number to select.
#4
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
I was just tryin to recall when i set mine up, unfortunately not on my car anymore...
IIRC i remmeber 01/02 being a setting for something.. think IN=01 out=02
Rob
IIRC i remmeber 01/02 being a setting for something.. think IN=01 out=02
Rob
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mister:E
Subaru Parts
2
24 September 2015 01:37 PM