Roof lining
#1
I'm trying to take the roof lining out of my scooby and i cant get the holders for the sun visors off. Anyone taken these off before.
The bits that hold the sun visor in position - you can take the visor out if you want it on the door window.
PS. It's a 96 model.
The bits that hold the sun visor in position - you can take the visor out if you want it on the door window.
PS. It's a 96 model.
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
They push in.. and expand...
imagine a hole in a wall... put your hand in and open your hand..
and point a finger at each corner.. (lets assume you have no thumb)
so tip them towards either the left or the right and then they come out...
(I had roof lining out when welding the roof back on )
Becarefull you can snap it easy... needs a couple of people to get it out really..
David
imagine a hole in a wall... put your hand in and open your hand..
and point a finger at each corner.. (lets assume you have no thumb)
so tip them towards either the left or the right and then they come out...
(I had roof lining out when welding the roof back on )
Becarefull you can snap it easy... needs a couple of people to get it out really..
David
#4
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I was putting a new 1/4 panel on the rear.. and the top of them sit under the roof.. so had to lift the roof to slot quarter panel under it..
David
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM