BLITZ IND KIT ON A MY95 WRX WITH ABS ?
#2
It's a tight fit but it can be done.
Either remove the big chunky resonator thingy in favour of a straight pipe (like HKS kits use) or just angle the existing setup upwards a bit, like this:
Cheers
Rich
Either remove the big chunky resonator thingy in favour of a straight pipe (like HKS kits use) or just angle the existing setup upwards a bit, like this:
Cheers
Rich
#3
2 Rich: Have u used that elbow hose from first pic and cut it to make that 2nd pic setup or?..(what about 80mm to 70mm diameter change?)
Whan you remove that plastic resonator box where did you connected that purge(*1) hose that enters it?
If you didn't used elbow hose where have you connected that second gas purge(*2) hose?
Thanks upfront...
Whan you remove that plastic resonator box where did you connected that purge(*1) hose that enters it?
If you didn't used elbow hose where have you connected that second gas purge(*2) hose?
Thanks upfront...
#4
Hi,
No, didn't cut the pipe, bought a custom solution which has an adaptor for pipe 1. Pipe 2 cureently vents to atmosphere, but i am working on T-piecing it into the current inlet.
Cheers
Rich
No, didn't cut the pipe, bought a custom solution which has an adaptor for pipe 1. Pipe 2 cureently vents to atmosphere, but i am working on T-piecing it into the current inlet.
Cheers
Rich
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM