Starting Problems
16 December 2002, 01:26 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2002
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I have a 95 Legacy GT Twin Turbo Estate which has starting problems. Fine when cold or if left for up to 5 minutes but when left for 30+ minutes it simply won’t start, very inconvenient !
I have read several threads and believe it is probably the crank or cam positioning sensor. I want to check the error codes stored in the ECU to see if it agrees but do not know how to do it, can anyone help? I know you connect some wires under the dash but how do I identify which ones and what connectors do I connect? Also how do I clear / do a reset of the ECU?
Also can error codes be stored without the ECL (engine check light) being on? I thought as soon as a code was detected and stored the ECL would come on until the codes were cleared?
If it is the positioning sensor how much are they and will a UK spec Impreza fit?
Many thanks in anticipation?
I have read several threads and believe it is probably the crank or cam positioning sensor. I want to check the error codes stored in the ECU to see if it agrees but do not know how to do it, can anyone help? I know you connect some wires under the dash but how do I identify which ones and what connectors do I connect? Also how do I clear / do a reset of the ECU?
Also can error codes be stored without the ECL (engine check light) being on? I thought as soon as a code was detected and stored the ECL would come on until the codes were cleared?
If it is the positioning sensor how much are they and will a UK spec Impreza fit?
Many thanks in anticipation?
16 December 2002, 01:32 PM
#2
Thread
Thread Starter
Forum
Replies
Last Post