dawes device on uk turbo
#1
at what bar psi should i set this without blowing up my engine i have a my98 uk turbo and have just recieved my dawes device also going to put hks induction kit and dump valve this week.my turbo is boosting at 0.75 at the moment.....any help would be fantastic thanx
#4
Big difference. Boost comes in lower down the rev range, and hold steady up to the red (although I find that I change gear a lot sooner now as the boost is better lower down).
Took it to Power Station RR last week and made 238bhp, with Dawes, Decat Centre, Magnex BB and ITG Panel.
Got a decat down pipe to go on on Monday aswell
Took it to Power Station RR last week and made 238bhp, with Dawes, Decat Centre, Magnex BB and ITG Panel.
Got a decat down pipe to go on on Monday aswell
#5
has yours got the smaller turbo like mine,also will you let me know how you go with the de-cat front.mine has de-cat centre at the moment also ppp fitted when new cheers fester
#7
Well, just been out with the new de-cat downpipe. Love it already.
Turbo boost at lower revs, and not too much louder than before. Also get the odd pop and bang on liftoff in lower gears.
Big Grin Time!!!!!
Terry
Turbo boost at lower revs, and not too much louder than before. Also get the odd pop and bang on liftoff in lower gears.
Big Grin Time!!!!!
Terry
Trending Topics
#9
Do it!!!!
Just driven the 60 miles into work, and never had so much fun on the Twisties before the motorway. Just need to learn how to drive it again now. Accelerated out of a T-Junction from standing as normal, and before I knew it the back end was coming round! Need to give it extra respect now, especially on these dark damp mornings. No extra noise on the motorway when cruising either.
Let me know how you get on.
Terry
Just driven the 60 miles into work, and never had so much fun on the Twisties before the motorway. Just need to learn how to drive it again now. Accelerated out of a T-Junction from standing as normal, and before I knew it the back end was coming round! Need to give it extra respect now, especially on these dark damp mornings. No extra noise on the motorway when cruising either.
Let me know how you get on.
Terry
#10
Has anyone fitted the Dawes device to a MY99 car? How much power difference has it made? I am getting one fitted by JW Racing would like to know how much difference they make.
#11
No extra noise on the motorway mine is very loud already sounds like its changed the car completly just what i need.d/device has'nt landed yet it should come this week sometime and ill put it on at weekend
#12
edited by webmaster to remove commercial advertising. If you would like to advertise on scoobynet, please contact me at webmaster@scoobynet.co.uk or check out shop.scoobynet.co.uk/vendors/info.asp
[Edited by webmaster - 11/27/2002 10:13:29 AM]
Is this fair?
[Edited by grant620 - 11/28/2002 12:04:57 AM]
[Edited by webmaster - 11/27/2002 10:13:29 AM]
Is this fair?
[Edited by grant620 - 11/28/2002 12:04:57 AM]
#13
The Dawes device is £50 but can be setup correctly as part of the price. We were warned that you must monitor fuel/air ratio and boost pressure whilst increasing and setting higher boost or you risk damaging the engine.
Apparently once set up right it makes a hell of a difference.
Apparently once set up right it makes a hell of a difference.
#14
Scooby Regular
Join Date: Dec 2001
Location: Just far enough from sunny Liverpool
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
You're quite right, it can make a hell of a difference if set up correctly.
Not aware of anyone selling and installing for £50 though ~ thats just the cost of the unit.
Also strongly recommend and AFR, boost gauge (essential) and a knock-link. It may add a bit to the price but its a hell of a lot cheaper than a re-build.
hope this helps,
simon
Not aware of anyone selling and installing for £50 though ~ thats just the cost of the unit.
Also strongly recommend and AFR, boost gauge (essential) and a knock-link. It may add a bit to the price but its a hell of a lot cheaper than a re-build.
hope this helps,
simon
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM