what PSI should you run Dawes at?
03 August 2002, 10:53 AM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2002
Location: Norhtumberland
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Hi All
Just been setting my Dawes device up and set the psi to about
15-16 is this about right, or should I squeeze a bit more out or reduce it a bit? It was at about 18-19 but the fuel cut kept kicking it.
Any thoughts, cheers
Simon.
Just been setting my Dawes device up and set the psi to about
15-16 is this about right, or should I squeeze a bit more out or reduce it a bit? It was at about 18-19 but the fuel cut kept kicking it.
Any thoughts, cheers
Simon.
03 August 2002, 12:16 PM
#2
Scooby Regular
iTrader: (3)
Join Date: Apr 2001
Location: Stirling
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
For my MY99 I set it to around 16.5 PSI - thats at WOT in 4th and 5th. My fuel cut was around 17.5 PSI but you want to take it down a turn from there.
Richard.
Richard.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM