how to fit passenger wing

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2002 | 06:48 PM

my99

Thread Starter

Scooby Regular

Joined: Nov 2001

Posts: 180

Likes: 0

Does anyone know how easy it is to fit a passenger wing to a 99 turbo.

Rgds
Garry

Jul 9, 2002 | 08:34 PM

David_Wallis

Scooby Regular

Joined: Nov 2001

Posts: 15,239

Likes: 1

From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?

piece of ****... remove sidelight... remove head light... remove 11mm bolts... remove all under the bonnet... theres also a couple inside the wheel arch near the bumper... then some down by the sill and then inside the door shut... you will have to half open the door for these... then remove wing... fit new one paying attention to the gap at the bottom of the a post... check all the panel gaps look even then tighten bolts up... might be worth spraying with waxoil or similar

David