how to fit passenger wing
09 July 2002, 08:34 PM
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
piece of ****... remove sidelight... remove head light... remove 11mm bolts... remove all under the bonnet... theres also a couple inside the wheel arch near the bumper... then some down by the sill and then inside the door shut... you will have to half open the door for these... then remove wing... fit new one paying attention to the gap at the bottom of the a post... check all the panel gaps look even then tighten bolts up... might be worth spraying with waxoil or similar
David
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM