Standard Turbos and Specs for Imprezas
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2020
Location: England
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Standard Turbos and Specs for Imprezas
I'm planning to improve the performance of my turbo by keeping it looking standard from the outside but changing the cartridge compressor/turbine/bearing etc. This upgrade would be in addition to a new walbro fuel pump.
The car is a JDM subaru impreza V2 wrx sti gc8c4ed with a standard factory TD05 turbo. I've been looking for a new CHRA with oil lubrication and water cooling but i'm not sure what sizes of compressor wheel and turbine wheel would fit. Also there seems to be a Small 16G and a Big 16G??
=============
"MAMBA Turbo Billet GTX CHRA Cartridge TD05H-16G with 9 blade turbine wheel + 6+6 Billet wheel + 4 holes bearing housing"
Compressor Wheel Spec 48.3 / 68 mm (EVO3 Big 16G 6+6 High Flow Billet Wheel w/ extended tip and Smaller nose OD / Higher Angle to get more airflow)
Turbine Wheel Spec 49.2 / 56 mm ( Inconel / 9 blade Wheel)
=============
https://www.ebay.co.uk/itm/362611298...75.c101224.m-1
COMPRESSOR WHEEL:
48.3 / 68mm (6+6 Blades Billet wheel BIG16G), We also offer GTX 11 blades billet wheel, please let us know if you need to change.
TURBINE WHEEL:
49.2 / 55.8mm (Standard 12 Blades TD05H Performance High Inconel)
=============
The car is a JDM subaru impreza V2 wrx sti gc8c4ed with a standard factory TD05 turbo. I've been looking for a new CHRA with oil lubrication and water cooling but i'm not sure what sizes of compressor wheel and turbine wheel would fit. Also there seems to be a Small 16G and a Big 16G??
=============
"MAMBA Turbo Billet GTX CHRA Cartridge TD05H-16G with 9 blade turbine wheel + 6+6 Billet wheel + 4 holes bearing housing"
Compressor Wheel Spec 48.3 / 68 mm (EVO3 Big 16G 6+6 High Flow Billet Wheel w/ extended tip and Smaller nose OD / Higher Angle to get more airflow)
Turbine Wheel Spec 49.2 / 56 mm ( Inconel / 9 blade Wheel)
=============
https://www.ebay.co.uk/itm/362611298...75.c101224.m-1
COMPRESSOR WHEEL:
48.3 / 68mm (6+6 Blades Billet wheel BIG16G), We also offer GTX 11 blades billet wheel, please let us know if you need to change.
TURBINE WHEEL:
49.2 / 55.8mm (Standard 12 Blades TD05H Performance High Inconel)
=============
Last edited by dangerous_dadbler; 10 August 2021 at 12:42 PM.
#2
Scooby Regular
iTrader: (5)
I'm planning to improve the performance of my turbo by keeping it looking standard from the outside but changing the cartridge compressor/turbine/bearing etc. This upgrade would be in addition to a new walbro fuel pump.
The car is a JDM subaru impreza V2 wrx sti gc8c4ed with a standard factory TD05 turbo. I've been looking for a new CHRA with oil lubrication and water cooling but i'm not sure what sizes of compressor wheel and turbine wheel would fit. Also there seems to be a Small 16G and a Big 16G??
=============
"MAMBA Turbo Billet GTX CHRA Cartridge TD05H-16G with 9 blade turbine wheel + 6+6 Billet wheel + 4 holes bearing housing"
Compressor Wheel Spec 48.3 / 68 mm (EVO3 Big 16G 6+6 High Flow Billet Wheel w/ extended tip and Smaller nose OD / Higher Angle to get more airflow)
Turbine Wheel Spec 49.2 / 56 mm ( Inconel / 9 blade Wheel)
=============
https://www.ebay.co.uk/itm/362611298...75.c101224.m-1
COMPRESSOR WHEEL:
48.3 / 68mm (6+6 Blades Billet wheel BIG16G), We also offer GTX 11 blades billet wheel, please let us know if you need to change.
TURBINE WHEEL:
49.2 / 55.8mm (Standard 12 Blades TD05H Performance High Inconel)
=============
The car is a JDM subaru impreza V2 wrx sti gc8c4ed with a standard factory TD05 turbo. I've been looking for a new CHRA with oil lubrication and water cooling but i'm not sure what sizes of compressor wheel and turbine wheel would fit. Also there seems to be a Small 16G and a Big 16G??
=============
"MAMBA Turbo Billet GTX CHRA Cartridge TD05H-16G with 9 blade turbine wheel + 6+6 Billet wheel + 4 holes bearing housing"
Compressor Wheel Spec 48.3 / 68 mm (EVO3 Big 16G 6+6 High Flow Billet Wheel w/ extended tip and Smaller nose OD / Higher Angle to get more airflow)
Turbine Wheel Spec 49.2 / 56 mm ( Inconel / 9 blade Wheel)
=============
https://www.ebay.co.uk/itm/362611298...75.c101224.m-1
COMPRESSOR WHEEL:
48.3 / 68mm (6+6 Blades Billet wheel BIG16G), We also offer GTX 11 blades billet wheel, please let us know if you need to change.
TURBINE WHEEL:
49.2 / 55.8mm (Standard 12 Blades TD05H Performance High Inconel)
=============
unless your turbo has failed just leave it alone.
Thread
Thread Starter
Forum
Replies
Last Post
Scott.T
General Technical
31
13 April 2016 01:14 AM