Going to make my own loom, to my ej2,35 LINK G4
08 February 2018, 11:46 AM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: Sweden
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Going to make my own loom, to my ej2,35 LINK G4
Hello bought a new LINK G4 and im about to make my own loom, the engine itself is done now and i got all "pigtail" connectors but without wires so i have to re wire everything.
So my questions, when you look at stock you have colours on the cables but i dont have them anymore, so i wonder how i can see what PIN in each sensor is signal or ground or 5v etc? (subaru stock ones) the temp sensors etc came with a manual.
Sensors i need to know about: Both AVCS sensors, knock sensors, cam and crank sensor and TPS i think thats it
best regards
So my questions, when you look at stock you have colours on the cables but i dont have them anymore, so i wonder how i can see what PIN in each sensor is signal or ground or 5v etc? (subaru stock ones) the temp sensors etc came with a manual.
Sensors i need to know about: Both AVCS sensors, knock sensors, cam and crank sensor and TPS i think thats it
best regards
Thread
Thread Starter
Forum
Replies
Last Post
Scoobychick
Non Scooby Related
33
02 June 2008 06:28 PM
Black Cat
Non Scooby Related
5
03 July 2003 04:52 PM