what gasket?
#1
what gasket?
Im going to change my inlet pipe on my2001 jdm sti bug
Iam thinking that if I can lift the inlet manifold up enough, I will have space to fit it.
But what inlet gaskets would I need please?
The inlet manifold to head, or inlet to the tumbler thing.
This is a pic of my inlet
thanks ian
Iam thinking that if I can lift the inlet manifold up enough, I will have space to fit it.
But what inlet gaskets would I need please?
The inlet manifold to head, or inlet to the tumbler thing.
This is a pic of my inlet
thanks ian
#3
Scooby Regular
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Im in a similar position Ian, if your just looking to replace like for like then you'll need these
http://www.importcarparts.co.uk/part...y=&searchPart=
Or you could get phenolic spacers to reduce manifold temps.
Speak with Alyn @As performance as i did today, he'll advise whats best for you.
http://www.importcarparts.co.uk/part...y=&searchPart=
Or you could get phenolic spacers to reduce manifold temps.
Speak with Alyn @As performance as i did today, he'll advise whats best for you.
#4
if i was just going to lift the inlet manifold from the tgv, then im guessing that this is the gasket that i would need?
http://www.ebay.co.uk/itm/Manifold-T...gAAOSw-4BXYrDp
http://www.ebay.co.uk/itm/Manifold-T...gAAOSw-4BXYrDp
#5
Scooby Regular
iTrader: (11)
Join Date: Sep 2010
Location: everywhere
Posts: 2,059
Likes: 0
Received 0 Likes
on
0 Posts
Iirc the bolts go through both the manifold and the tgv so theres a good chance when you lift the manifold the lower gaskets may split too, for the sake of an extra 15 quid get both sets.