Paul1978

iTrader: (1)

I am replacing the cambelt on my 04 wrx, i have got the new belt over the drivers side pulleys and now lining up passenger side. I have read that when turning the camshafts to get pulley marks to line up you turn the top pulley clockwise and bottom pulley anti clockwise



to get the marks in line i will need to rotate the top pulley nearly a full turn clockwise, does this look right? it seems a long way to rotate it, or could i just turn it 1/8 a turn anti clockwise to get the two marks in line.

**jay**

iTrader: (1)

Turn it anti clockwise and back the crank back a bit first to take it away from tdc then time the crank.

Paul1978

iTrader: (1)

So i need to rotate the crank anti clockwise quarter turn, line up cam pulleys, return crank to tdc clockwise and put belt on?

boosted

Tdc?! The Impreza times up with Pistons half up and down.

boosted

Just turn it any way, then lightly (read lightly, not spactardidly) grip accross the two pulleys with small vice grips, this will hold them in place.
Slip belt on, job done

**jay**

iTrader: (1)

Thats what i ment as there is a marker for tdc as well as the timing marking, the amount of folk ive seen trying to time up with the tdc as its confusing the 2 marks for some people.

Paul1978

iTrader: (1)

cheers guys