Remappers told me I need these! Help!
#1
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Remappers told me I need these! Help!
Just been to Veizu Remappers near Stratford Upon Avon for a stage 1 remap on my 2004 Blob WRX completely standard apart from a catback and a K&N panel filter.
After being put on the rolling road they told me it needs a Wastegate Actuator as its presumed faulty/leaking and preferably a FMIC as the intake temp is very high.
Where do I buy a Wastegate actuator from?? I wouldn't know where to start as there are different PSI's etc which I have no clue?!?!
Also do I really need to change to a Front Mount as I here the standard wrx one is fine below 300bhp, would an STI Top mount be sufficient?
Any help would be appreciated as the maps been left on but the wastegate needs to be changed.
After being put on the rolling road they told me it needs a Wastegate Actuator as its presumed faulty/leaking and preferably a FMIC as the intake temp is very high.
Where do I buy a Wastegate actuator from?? I wouldn't know where to start as there are different PSI's etc which I have no clue?!?!
Also do I really need to change to a Front Mount as I here the standard wrx one is fine below 300bhp, would an STI Top mount be sufficient?
Any help would be appreciated as the maps been left on but the wastegate needs to be changed.
Trending Topics
#10
Scooby Regular
iTrader: (4)
I would highly recommend you take it to TDR in Warwick, They are a Subaru tuning specialist and only a short distance away. They will test your actuator for you and may well have a new or used replacement if needed.
A front mount will not compliment your setup and will just induce a load of turbo lag.
Call TDR 01926 403 889
http://tdracing.co.uk/
A front mount will not compliment your setup and will just induce a load of turbo lag.
Call TDR 01926 403 889
http://tdracing.co.uk/
#13
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Should have taken it there for sure
Can I get my money back if I get them to take the map off? I cant afford to keep getting it mapped at £300 a pop!
What does "check/set the preload on the actuator" mean?
Thank you for helping guys, I don't want to be taken for a fool! even though i am haha
Can I get my money back if I get them to take the map off? I cant afford to keep getting it mapped at £300 a pop!
What does "check/set the preload on the actuator" mean?
Thank you for helping guys, I don't want to be taken for a fool! even though i am haha
#14
Scooby Regular
iTrader: (4)
Call Mark at TDR, he's a nice guy and if you explain your predicament he will check your car is running correctly and that the map is safe to use and will advise you regarding your actuator.
Did your mapper say what boost it was making and dropping off to ?? did u get a dyno printout ??
Did your mapper say what boost it was making and dropping off to ?? did u get a dyno printout ??
#15
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Call Mark at TDR, he's a nice guy and if you explain your predicament he will check your car is running correctly and that the map is safe to use and will advise you regarding your actuator.
Did your mapper say what boost it was making and dropping off to ?? did u get a dyno printout ??
Did your mapper say what boost it was making and dropping off to ?? did u get a dyno printout ??
Left there feeling defeated. I have emailed tdr and will be popping down there as soon as I can next week.
#16
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Take it back and demand your money back. It says on the website they have a no quibble refund policy.
Originally Posted by Veizu Remappers
Over the last 50 or so years Subaru has earned a reputation for engineering brilliance, so it’s not surprising that Viezu offers a very wide range of Subaru tuning and Subaru remapping. Viezu has developed range of Subaru chip tuning and Subaru ECU remapping services, covering virtually all Subaru vehicles. The Subaru tuning we provide is custom written so can be tailor made to suit your needs. Viezu’s Subaru chip tuning will improve overall power and torque, driveability and throttle response, as well as improving Subaru fuel economy and fuel efficiency. Viezu has remaps covering both Subaru diesel tuning and Subaru petrol tuning too. Most of the Subaru tuning is carried out quickly and efficiently through the OBD port and a remap can be installed in as little as 45 minutes. All of the remaps and Subaru tuning produced by Viezu can be tailored to your exact needs, be it all out Subaru performance or Subaru fuel economy remap offering fuel saving. All Subaru tuning and remapping work comes with Viezu’s no quibble money back guarantee and full underwritten insurance. Subaru car tuning is developed in house by our team of experts on our environmentally controlled rolling road and for many thousands of miles both in simulated and real life conditions.
#17
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
#21
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
#24
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Haha I know right! Tbh I should have just stopped them there. They said you're intake temps are very high.... Hmm wonder why?! Surely it's not good for the car to be put through its paces with the only cool air it had is an asthmatic squirrel blowing on it..
#25
Scooby Regular
iTrader: (1)
Wtf! My misses had a bigger hair dryer! My car would not go near that, be lucky to blow leaves off the driveway with that thing lol
Intake temps high?! No wonder as there is no airflow to the tmic what a bunch of cowboys!
Intake temps high?! No wonder as there is no airflow to the tmic what a bunch of cowboys!
Last edited by **jay**; 24 May 2016 at 01:00 PM.
#26
Yep! What a joke aiming the fan no where near the intercooler lol!!!!
#27
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm back from TDR and there was no problem with the Wastegate, and obvs no problem with the intake temp!
Veizu could only get 201bhp!?! And TDR got 265bhp and that's on 97ron I should be seeing past 270 when using 99. Couldn't be happier! Very friendly and honest people who knew what they're on about. Will definitely be going back for all my work including my services as I trust no one else now!
Veizu could only get 201bhp!?! And TDR got 265bhp and that's on 97ron I should be seeing past 270 when using 99. Couldn't be happier! Very friendly and honest people who knew what they're on about. Will definitely be going back for all my work including my services as I trust no one else now!
#28
Scooby Regular
iTrader: (2)
Well I'm back from TDR and there was no problem with the Wastegate, and obvs no problem with the intake temp!
Veizu could only get 201bhp!?! And TDR got 265bhp and that's on 97ron I should be seeing past 270 when using 99. Couldn't be happier! Very friendly and honest people who knew what they're on about. Will definitely be going back for all my work including my services as I trust no one else now!
Veizu could only get 201bhp!?! And TDR got 265bhp and that's on 97ron I should be seeing past 270 when using 99. Couldn't be happier! Very friendly and honest people who knew what they're on about. Will definitely be going back for all my work including my services as I trust no one else now!
Last edited by CharlesTuna; 24 May 2016 at 04:16 PM.
#30
Scooby Regular
Thread Starter
Join Date: Apr 2011
Location: Stratford-upon-Avon
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts