Help please coding device in fuse box
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2016
Location: Bognor regis
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Help please coding device in fuse box
I recently bought the car and just had a bit of time to have a look around inside
I found small code device where is the fuse box.
Anyone got any idea what is it?
Thanks in advance
I found small code device where is the fuse box.
Anyone got any idea what is it?
Thanks in advance
#3
Scooby Regular
Standard fit Sigma M30 Alarm keypad fitted in coin tray.
Remove coin tray to get to fuse box
Remove coin tray to get to fuse box
#5
Scooby Regular
Join Date: Oct 2015
Location: Stoke on Trent
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
As I recently learned yes ...yes you do. If you have more than one fob to unlock it the it's not so bad but always handy. If you loose your fob(s) then you can just punch the code in to disarm the imobiliser. The is a way to program in a new code providing you have a working fob. Someone kindly put a link in a thread I started not so long back so if you need it it's about.
#6
Scooby Regular
iTrader: (1)
Here you go :
Changing your PIN:
- Arm and then Disarm the system using a working Key/Remote.
- Within 30 seconds of disarming, type into the keypad: *17856*92*wxyz*wxyz# (where wxyz is your new PIN code)
- Arm the system with the Key/Remote.
- You should now be able to disarm the system using the new PIN code
Mick
Changing your PIN:
- Arm and then Disarm the system using a working Key/Remote.
- Within 30 seconds of disarming, type into the keypad: *17856*92*wxyz*wxyz# (where wxyz is your new PIN code)
- Arm the system with the Key/Remote.
- You should now be able to disarm the system using the new PIN code
Mick
#7
Scooby Newbie
Thread Starter
Join Date: Feb 2016
Location: Bognor regis
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Here you go :
Changing your PIN:
- Arm and then Disarm the system using a working Key/Remote.
- Within 30 seconds of disarming, type into the keypad: *17856*92*wxyz*wxyz# (where wxyz is your new PIN code)
- Arm the system with the Key/Remote.
- You should now be able to disarm the system using the new PIN code
Mick
Changing your PIN:
- Arm and then Disarm the system using a working Key/Remote.
- Within 30 seconds of disarming, type into the keypad: *17856*92*wxyz*wxyz# (where wxyz is your new PIN code)
- Arm the system with the Key/Remote.
- You should now be able to disarm the system using the new PIN code
Mick
Thank you very much your help guys really appriciate it!!
i will change the code then!
Thanks again
Trending Topics
#9
Scooby Regular
iTrader: (1)
[QUOTE=Robidnb26;11796157]Thank you very much your help guys really appriciate it!!
i will change the code then!
Thanks again[/QUOTE
When you enter each digit, the red light on the keypad should flash once - if it flashes rapidly then you have to start over from the beginning.
If you type :
*17856*92*
the next four numbers will be your new code
press *
repeat your new four number code
press # to save and exit programming mode
If you need to use the keypad to disarm the alarm, just enter your 4 digit code
Mick
i will change the code then!
Thanks again[/QUOTE
When you enter each digit, the red light on the keypad should flash once - if it flashes rapidly then you have to start over from the beginning.
If you type :
*17856*92*
the next four numbers will be your new code
press *
repeat your new four number code
press # to save and exit programming mode
If you need to use the keypad to disarm the alarm, just enter your 4 digit code
Mick
Last edited by merlin24; 13 February 2016 at 09:02 PM.
#10
Scooby Newbie
Thread Starter
Join Date: Feb 2016
Location: Bognor regis
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=merlin24;11796271]
Thank you your help
Thank you very much your help guys really appriciate it!!
i will change the code then!
Thanks again[/QUOTE
When you enter each digit, the red light on the keypad should flash once - if it flashes rapidly then you have to start over from the beginning.
If you type :
*17856*92*
the next four numbers will be your new code
press *
repeat your new four number code
press # to save and exit programming mode
If you need to use the keypad to disarm the alarm, just enter your 4 digit code
Mick
i will change the code then!
Thanks again[/QUOTE
When you enter each digit, the red light on the keypad should flash once - if it flashes rapidly then you have to start over from the beginning.
If you type :
*17856*92*
the next four numbers will be your new code
press *
repeat your new four number code
press # to save and exit programming mode
If you need to use the keypad to disarm the alarm, just enter your 4 digit code
Mick
Thank you your help
#11
Scooby Regular
If the car didn't come with a copy, might be worth downloading this..........
http://www.scoobypedia.co.uk/uploads...m30_manual.pdf
http://www.scoobypedia.co.uk/uploads...m30_manual.pdf
Thread
Thread Starter
Forum
Replies
Last Post
RS_Matt
ScoobyNet General
168
23 February 2016 09:42 PM
Kedlestone
Subaru Parts
6
13 February 2016 02:25 PM
bluenose boy
ScoobyNet General
0
07 February 2016 08:51 PM