I was wondering if anyone has fitted one of these to a newage?

http://www.lmaautoparts.com/products..._T-PIECE_KITS/

and if so, where did you mount the tee piece/pressure senders that are on the end of the hose once fitted?

Any pics would be a big help

Many thanks

Ade

 

yes I used one, will get a pic now for you

 

so its to the left of the Alternator cover as you look at the photo,

you will need to extend the wire to the OEM sensor to mount it this way



Close up

 

Or, better still, leave the useless OEM sensor on the garage shelf........

 

or better still relocate to the back of the head

 

Can you do that on a classic? I couldn't on mine, but newage may be different?

 

I used this one aswell, just make sure that sensors have some earth as if not yu will not have oil press warning light, mine is touching header tank

 

Thanks for the pics, great help

I had a look at the weekend to try and mount it in the same place, but the bolt that came out of that fixing hole wont fit through the bracket supplied in the hose/t-piece kit?

How did you manage to get around this?

Thanks