2004 PPP exhaust
#2
Scooby Regular
iTrader: (3)
The centre section is just OEM I think mate. There's no such thing as a PPP centre section I don't think. The only prodrive elements of a PPP car were the rear silencer section and the downpipe with prodrive cat. The centre section is just a normal 2.5" bore pipe.... (I stand to be corrected though)
#3
Scooby Newbie
Thread Starter
The centre section is just OEM I think mate. There's no such thing as a PPP centre section I don't think. The only prodrive elements of a PPP car were the rear silencer section and the downpipe with prodrive cat. The centre section is just a normal 2.5" bore pipe.... (I stand to be corrected though)
C
Last edited by TenaciousC; 01 September 2015 at 01:20 PM.
#4
Scooby Regular
iTrader: (2)
Join Date: Mar 2014
Location: Mancunian in Edinburgh
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Prodrive did actually make a de-res centre pipe (part no. SE/065/SU WRX/STi 2000-05) but was extra over the PPP kit, I managed to get hold of one for my wagon. They are made by Scorpion I think so you'll Probably find they are identical minus the part number stamp.
They actually made loads of extra stuff that didn't appear on PPP kits.
They actually made loads of extra stuff that didn't appear on PPP kits.
#5
Scooby Newbie
Thread Starter
Sorry for the photo bomb but still trying to work out what I can use to replace the centre section on this system. I tried to get a part from my local motor factors, but they have supplied a 2" diameter section where this system appears to be 2.5" all the way.
Therefore, can I assume that this part:
http://scoobyworld.co.uk/catalog/product_info.php?cPath=24_53&products_id=3374
will be a compatible replacement?
Thanks in advance.
C
Therefore, can I assume that this part:
http://scoobyworld.co.uk/catalog/product_info.php?cPath=24_53&products_id=3374
will be a compatible replacement?
Thanks in advance.
C
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM