FMIC on 2.0 and 2.5 WRX - diff in lag?
27 August 2015, 12:17 PM
#1
Scooby Regular
Thread Starter
iTrader: (17)
Join Date: Nov 2011
Location: London
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
FMIC on 2.0 and 2.5 WRX - diff in lag?
Hi All,
i'm wondering if the same FMIC from a 2.0 WRX fitted to a 2.5 WRX with the same turbo have the same lag?
Does the larger displacement reduce the lag?
Cheers in advance for sharing your opinion and experience.
i'm wondering if the same FMIC from a 2.0 WRX fitted to a 2.5 WRX with the same turbo have the same lag?
Does the larger displacement reduce the lag?
Cheers in advance for sharing your opinion and experience.
28 August 2015, 02:45 AM
#2
Hi Resh
On 2.5L I would say you will be fine like with TMIC or FMIC,on 2.5L you can throw any turbo and turbo will spool much better than on 2.0L,just don't expect will rev as 2.0L,2.5L I like due the torque,but if you like rev the engine,then 2.0L is better option,2.5L is bit lazier engine with lots of torque
And about the FMIC,I would suspect you will loose bit of spool or lag,but you will never notice that if its mapped correctly
Hope this helps and good luck
Thanks,Jura
On 2.5L I would say you will be fine like with TMIC or FMIC,on 2.5L you can throw any turbo and turbo will spool much better than on 2.0L,just don't expect will rev as 2.0L,2.5L I like due the torque,but if you like rev the engine,then 2.0L is better option,2.5L is bit lazier engine with lots of torque
And about the FMIC,I would suspect you will loose bit of spool or lag,but you will never notice that if its mapped correctly
Hope this helps and good luck
Thanks,Jura
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM