Oil catch can problem
19 April 2015, 07:00 PM
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2012
Location: belgium
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Oil catch can problem
Hi all,
I have a 1997 impreza turbo with a newage spec C inside
I used my old manifold (rewelded) to keep my loom and stuff working
So i allso disabled the avcs, but i still used the heads..
I used the front pipes on the heads, the ones in the back have been blocked off since i don't use the avcs
So the real problem is that when i drive the car i'm having smoke out of the catchcan breather.. I don't really know whats going on, since i did the installation fine.. i guess
Heres a pic wich discribes what i have done..
Hope you guys can tell me whats going on..
I have a 1997 impreza turbo with a newage spec C inside
I used my old manifold (rewelded) to keep my loom and stuff working
So i allso disabled the avcs, but i still used the heads..
I used the front pipes on the heads, the ones in the back have been blocked off since i don't use the avcs
So the real problem is that when i drive the car i'm having smoke out of the catchcan breather.. I don't really know whats going on, since i did the installation fine.. i guess
Heres a pic wich discribes what i have done..
Hope you guys can tell me whats going on..
Last edited by jersey; 19 April 2015 at 07:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post