2 liter vs 2.5 liter STI head difference
19 March 2015, 02:32 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2010
Location: Naboomspruit, South Africa
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
2 liter vs 2.5 liter STI head difference
Good day guys
Can someone please post images of both the 2 liter head and of the later 2.5 liter head.
The say the 2.5 head has much much smaller valves and hence the engine cannot breathe well. I's like to compare myself.
Thanks a lot!
Can someone please post images of both the 2 liter head and of the later 2.5 liter head.
The say the 2.5 head has much much smaller valves and hence the engine cannot breathe well. I's like to compare myself.
Thanks a lot!
20 March 2015, 12:26 PM
#2
Former Sponsor
Join Date: Aug 2012
Location: Holywell
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
There are more differnces to consider, the valves are the same size, but the I.D of the combustion chamber is larger than a 2.0 and the position of the position sensor is differnt as well as a differnt type of sensor. i.e. don't try and fit 2.5 on 2.0 and don't try and fit 2.0 pre hawk to a hawk. 2.0 JDM hawk heads will fit though.
20 March 2015, 12:32 PM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2010
Location: Naboomspruit, South Africa
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
There are more differnces to consider, the valves are the same size, but the I.D of the combustion chamber is larger than a 2.0 and the position of the position sensor is differnt as well as a differnt type of sensor. i.e. don't try and fit 2.5 on 2.0 and don't try and fit 2.0 pre hawk to a hawk. 2.0 JDM hawk heads will fit though.
thanks for the answer
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM