M2RTXhawkeye

iTrader: (61)

Guys need some help just sold a member a newage omp wheel with the correct boss..

See this thread

https://www.scoobynet.com/subaru-parts-451/1009800-omp-wrc-steering-wheel-and-boss-for-new-age.html

Now problem is the boss doesn't have any wires asuming these are needed to cancel air bag light and to work horn...? Can these resistors be bought seperately or made to fix this issue? Ang help appreciated or point me towards a reasonable boss that will work on a newage please

Thanks in advance

Martin

bustaMOVEs

iTrader: (31)

You don't get wires for a boss, the only wires are from horn (connect to wires from cowl) and resistor to plug into airbag plug again from cowl. (You can buy a resistor from Maplins 3.3ohm and just put both ends into plug)

Some boss kits do come with the resistor for easy installation and if horn is bought with a wheel then you get them wires also

M2RTXhawkeye

iTrader: (61)

Busta cheers again buddy, Couldt work out why there wernt any wires out the boss... Clears that up nicely I'll pass on the info

Thanks again

Martin

Ash

Agree with the above

M2RTXhawkeye

iTrader: (61)

Thanks guys, I Couldt remember if there were wires to go in the boss and didt want to seem like I've done the buyer of the wheel out by selling a boss not compatible...

Martin

bustaMOVEs

iTrader: (31)

Looking at that add, seems it's from a newage so boss should fit on newage. I see it's got a horn too so should be wires from horn.
Easy diy if not

M2RTXhawkeye

iTrader: (61)

Been a while since I changed a wheel so could remember... Appreaciate the replies will pass on this info now

Martin