Intercooler spray on MY00
#1
Hi all just wundered if anyone can help, i've been toying with fitting a home made intercooler spray. Mine is a MY 00 with a Prodrive ECU and i want to know is there a connection to trigger the spray on boost presure ore will i have to make do with a manualy operated switch?
All the best DIXIE.
All the best DIXIE.
#3
Do it yourself, read this thread :-
http://www.scoobynet.co.uk/bbs/threa...threadid=97289
Cheers Phill C
http://www.scoobynet.co.uk/bbs/threa...threadid=97289
Cheers Phill C
#4
With intercooler sprayers you want the water to have sprayed before you start boosting otherwise you will get hardly any benifit, so the best solution is a temperature controlled one.
#5
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
There was a good Autospeed article on this suggesting a combination of high core temperature AND present engine load were most effective and best with water usage, based on the intercooler being a heat soak primarily. At the track I will probably just give it a good press on the straights before I get the big TMIC which hopefully won't need it.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM