Hesitation when boosting for the first time
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Hesitation when boosting for the first time
Hi guys.
A typical hesitation query...I've nailed it down to the first time I put my foot down. It seems that the first boosting of the journey now brings on hesitation in the rev range (around 2.5k revs), after that it boosts normal as if I've 'cleared' the system. I've cleaned the MAF and Boost Solenoid and can't seem to find the issue...
Any help would be appreciated.
Cheers,
Andy
A typical hesitation query...I've nailed it down to the first time I put my foot down. It seems that the first boosting of the journey now brings on hesitation in the rev range (around 2.5k revs), after that it boosts normal as if I've 'cleared' the system. I've cleaned the MAF and Boost Solenoid and can't seem to find the issue...
Any help would be appreciated.
Cheers,
Andy
#2
Scooby Regular
Join Date: Nov 2012
Location: Worcestershire
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys.
A typical hesitation query...I've nailed it down to the first time I put my foot down. It seems that the first boosting of the journey now brings on hesitation in the rev range (around 2.5k revs), after that it boosts normal as if I've 'cleared' the system. I've cleaned the MAF and Boost Solenoid and can't seem to find the issue...
Any help would be appreciated.
Cheers,
Andy
A typical hesitation query...I've nailed it down to the first time I put my foot down. It seems that the first boosting of the journey now brings on hesitation in the rev range (around 2.5k revs), after that it boosts normal as if I've 'cleared' the system. I've cleaned the MAF and Boost Solenoid and can't seem to find the issue...
Any help would be appreciated.
Cheers,
Andy
#6
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
It doesn't seem to matter but usually within the first 5-10 mins. It seems to be the first time the car boosts. I've tightened all the pipes (dump valve pipe was particularly loose) and it seems smoother so do you reckon it could gave been pressure escaping and then the ECU learning around the problem after a couple of boot fills?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
aaron_ions
General Technical
17
03 November 2021 11:07 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM