narelle

could anyone help me with the routing of the vacuum pipes on the manifold which go to where etc need to make sure mine are routed correctly mainly the 3 next to each other on the manifold and where the go pictures or a diagram would be a great help thankyou

Dmacnz

Fuel pressure reg (Small metal pipe under manifold under TPS)
BOV
MAP sensor

narelle

thanks for the help but I may need a little more or a diagram if anyone can get there hands on one as I have no vacuum pipes on the car need to start from scratch and plumb in boost solenoid etc thank you

Dmacnz

From memory,
The big nipple goes directly to the blow off valve nipple.
The middle one goes to the map sensor through the pressure solenoid thing!(mounted next to map sensor)
The last small nipple goes into the tiny metal pipe under the manifold on the tps side. This goes to the fuel pressure regulator

narelle

ideal thankyou very much for the help I will go try sort it out when the rain hopefully stops thanks again

narelle

where does the very top pipe on the right hand some come from that isn't labelled please does it join onto the manifold

Dmacnz

That's the map sensor line. From the nipple on the manifold.

narelle

Spot on thankyou

narelle

All plumbed up at its better thanks but still not right where does the small pipe on top of the throttle body run to?

duds64

iTrader: (2)

that one runs down under the inlet manifold to the charcoal cannister

Dmacnz

Evap charcole cannister