What is this please
12 April 2014, 03:16 PM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Cambridgeshire
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
What is this please
Afternoon!!
I'm just putting my engine back together and found this mystery part in my box of bits at the end. Anyone know what it is, where it goes etc please?
The connector matches one at the front of the engine but I'm not sure if it's coincidence and if it isn't, what it does lol
Any help appreciated!!
Adam
I'm just putting my engine back together and found this mystery part in my box of bits at the end. Anyone know what it is, where it goes etc please?
The connector matches one at the front of the engine but I'm not sure if it's coincidence and if it isn't, what it does lol
Any help appreciated!!
Adam
12 April 2014, 05:25 PM
#3
Hey mate
It's a purge valve solenoid for the emission control (EGR)
You can find it on a diagram here
http://opposedforces.com/parts/impre...llustration_1/
and here
http://forums.nasioc.com/forums/show....php?t=2163999
I have the EGR pipes blocked on my car anyway, but the sensor is still there and still connected
It's a purge valve solenoid for the emission control (EGR)
You can find it on a diagram here
http://opposedforces.com/parts/impre...llustration_1/
and here
http://forums.nasioc.com/forums/show....php?t=2163999
I have the EGR pipes blocked on my car anyway, but the sensor is still there and still connected
Last edited by Codders; 12 April 2014 at 05:27 PM.
12 April 2014, 05:36 PM
#4
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Cambridgeshire
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
That would explain it. I definitely didn't have any hoses on it and scoobyclinic has blocked a load of vacuum hoses up so that would make sense. I'm guessing if I unplug it (bearing in mind it will be mapped to not be plumbed in but plugged in) it will through a EML?
Thanks for the reply!!
Thanks for the reply!!
12 April 2014, 05:38 PM
#5
Scooby Regular
iTrader: (6)
Join Date: May 2012
Location: Cardiff
Posts: 3,221
Likes: 0
Received 0 Likes
on
0 Posts
That would explain it. I definitely didn't have any hoses on it and scoobyclinic has blocked a load of vacuum hoses up so that would make sense. I'm guessing if I unplug it (bearing in mind it will be mapped to not be plumbed in but plugged in) it will through a EML? Thanks for the reply!!
