Jimbob_Scooby

iTrader: (3)

Hi guys, well I always said I would take this car to my grave and after 3 hard years of gathering parts together a new house and a higher mortgage to pay means I have to sell her! Its broke my heart and took alot of trying other ways to keep the car and finish my project but unfortuantly I just can't

So everything must go and hopefully someone els will use all these parts the way the should be used instead of being sat in boxes in my spare room!

JDM newage 6 speed gear box TY856WB3KA matched R180 wrc rear diff with prop shaft, newage drive shafts and hubs and full rear subframe and gear linkage all the parts needed to fit a classic, DCCD ecu also included.
£2500

Exedy hyper D-core carbon twin plate 6 speed clutch(brand new boxed)
£sold

Setrab 25 row oil cooler including pipe work
£sold

Type R version 5 5speed DCCD gear box TY754VB1CA with prop, shafts and R180 rear diff
£sold

GC8 white line anti lift kit
£sold

2.0 closed deck block fully inspected standard sized bore with conversion for rear thrust bearing for 2.5 crank and Roger Clark 14mm stud conversion also carried out to version 5 sti heads with dowels. Ported, polished and knife edged heads, cosworth 2.2 stroker kit consisting of forged cosworth pistons, cosworth H beam rods brand new 2.5 sti forged crank. Full genuine Subaru gasket set. Genuine Subaru timing kit with brand new tensioner and idle pulleys, cosworth Kevlar timing belt. All ancillarys and inlet manifold.(all parts brand new and boxed apart from blocks and heads ready to be built)
£4000

Lateral performance 1100cc injectors
£350

HDI hybrid gt2 front mount intercooler(brand new boxed)
£100

Group N engine mounts
£sold

Bosch 044 fuel pumps x2(brand new boxed)
£200pair

Custom Garrett GT35R Billett turbo(brand new boxed)
£sold

Lateral performance vernier pulleys(brand new boxed)
£sold to johnnybon

Lateral performance custom LP05 high lift cams(brand new boxed)
£sold to johnnybon

Supertech single piece inconel valves, dual valve springs, titanium retainers, bronze valve guides and new valve stem oil seals all Supertech(brand new boxed)
£sold to johnnybon

All version 5 type R interior available, sti bucket seats complete with rears no rips or wear £200

X reg version 5 type R in gunmetal grey with custom cages weld in roll cage (fia) tein coil overs, god speed front brake conversion using original 4pots, sti rear 2pot brakes oz superlegger 18" wheels in gold 2x Toyo T1r's 2x Yokohama Prada spec 2's, rolling shell with all panels very good condition not damaged in any way with V5 documents brought into the country from new even has full uk service history!
£4000ono

Other standard parts available like original intercooler with y piece
£50

Version 5 sti cams, valves, valve springs and pulleys
£100

Feel free to ask any questions pretty much every part I have is brand new and never been used makes me feel like crating to give this project up cos she could of been a monster! All parts to be posted are plus p&p offers welcome. Either post, pm or call me on 07966524427

Many thanks James

banny sti

iTrader: (68)

How far are you from gaz's place?

stevebt

iTrader: (8)

I'll give you £1000 for the turbo if your interested??

Jimbob_Scooby

iTrader: (3)

Meet you half way £1100? Cost me £1570 and it's brand new

Jimbob_Scooby

iTrader: (3)

Not far from gaz's mate

macs sti

1st dibs on oil cooler and anti lift kit please, any Picts? Cheers Stephen

prodriverules

iTrader: (52)

Is the HDi a kit or just core mate and what condition are the Grp N mounts in?

Ryan

stevebt

iTrader: (8)

The thing is Scoobyclinic offered me a brand new one for not a lot more than that £1100 price you said, so its not really in my interests to pay more than £1000. Good luck with your sale

JdcTypeR

iTrader: (19)

You have PM mate

Jimbob_Scooby

iTrader: (3)

[QUOTE=stevebt;10743197]The thing is Scoobyclinic offered me a brand new one for not a lot more than that £1100 price you said, so its not really in my interests to pay more than £1000. Good luck with your sale[/

They are £1200 plus vat at scooby clinic which is just shy of £1600 including vat I'm not cat registered so I can't clams any vat back so I paid the full price but thanks any way matey

Jimbob_Scooby

iTrader: (3)

Inter cooler is just the core as I was having a front mount turbo so custom boost pipes were needed the mounts are like new

Jimbob_Scooby

iTrader: (3)

Oil cooler and anti lift kit are yours Stephen will try and get some pics tomorrow or Friday at the latest matey cheers

kirstybumx3

iTrader: (22)

pm'd also willing to sell the tein coilovers?

cheers

snake1906

iTrader: (4)

Do you have the rotated kit to go with the turbo?

eggy790

iTrader: (20)

anypics?

wiley

iTrader: (63)

rotated turbo kit available mate??

wiley

Jimbob_Scooby

iTrader: (3)

I will get some pics up this weekend for you all, don't have the rotated kit sorry, I was having front mounted kit. May split shell and sell teins but would like the shell to go complete but if doesn't go complete I'll give you first refusals cheers.

Themexican

iTrader: (5)

would you sell the godspeed front disks and pads mate, pretty please pm me a price.

also, any gauges/pod for the interior and mats? Thanks

kirstybumx3

iTrader: (22)

ok thats would be great, if you could still pm me a round about price you would like for them if you do split

cheers

Tomwrx

iTrader: (54)

Would u sell the wheels from the type r?

KAS35RSTI

iTrader: (73)

Have you got a screamer pipe?

eggy790

iTrader: (20)

get one custom made to suit your kit kas

KAS35RSTI

iTrader: (73)

Ye I might just have to do that.

Bealescooby

iTrader: (36)

second on anti lift
any arb upgrades

price on wheels if u want to sell seperate

b3mwe

iTrader: (10)

Any induction kit ?

Davey96wrx

iTrader: (1)

Pm sent about type r gearbox and first dibs

johnnybon

iTrader: (70)

Hi what's the best deal you can do on the valves and cames??

Jimbob_Scooby

iTrader: (3)

Sorry no indication kit, Davey type R box is yours, johnnybon are you wanting valves with retainers and everything and are you wanting cams and vernier pulleys or just cams? If you was to buy the lot I'll do you a good deal mate

Jimbob_Scooby

iTrader: (3)

Still undecided about breaking the shell down if no interest in next couple of weeks those of you who have shown interest in brakes and coil overs and wheel I will pm you with a price. Should have some pics of items up tonight or in the morning for you all cheers

johnnybon

iTrader: (70)

Yes I'm interest in the whole lot also will this lot fit avec or v4 heads as i have both options thumb: