When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a JDM WRX STI. unforantly the engine has packed up (big end) and I have no choice but to strip her down for parts. This is the first motor I have attempted to break so bare with me and Ill try my best. I looking to sell the bits as quick as possible as I need a new car.
so I will try and list as much as I can but feel free to ask if I miss any thing
ive tried to put the pictures up but have struggled a bit.. if you want to see any more just ping me a message and ill send them privately.
I'm open to offers on all parts (I have a rough idea on price so no chancers)
6 speed gear box and r180 diff (this will be sold with front and rear hubs, prop, cradle, all drive shafts and gear linkage) £1800
Block ( has a sheared bolt and needs machining) £80
Heads £500
VF30 turbo £275
coil pack
Incooler spray system
sti inlet and fuel rail
small engine loom
wiring loom
ecu with keys, door locks and boot lock
Miltek 3" exhaust (needs welding) £250 the way it is or £300 and ill get it welded
oil catcher tank
fuel pump
boost solenoid
MAF sensor
1st lambo sensor
rear lambo sensor
map sensor
crank sensor
front cam sensor
header tank
altenator
air con pump
air con radiator
radiator with fan
washer bottle and pump
speed line corse alloys 18" with toyo proxys £550
Brembo cailpers, with disc and pads
£700
anti lift kit £80
front sub frame
rear subframe
rear trailing arms
master brake cylinder
ABS module
shell
front bumper, with spilter £125
rear bumper, with spilter £150
front grill £30
alloy bonnet and scoop £ 175
HID headlights £200
rear lights £80
side skirts £50
boot lid (no spoiler) £80
doors £50 each
JDM electric folding wing mirror
fuel filler door
speedo clock
steering wheel
alloys/brembos
alloys
Last edited by jaygarni; 25 January 2016 at 07:06 PM.
how much for exhaust? is it cat back or turbo back? 3" all way through or 2.5" at the flange? is it resonated on non-resonated? would you post?
Do you want the whole exhaust? It needs welding up in the middle.. Have no idea what a turbo back is? Don't think it has a cat.. It's 3" all the way through.. Im really **** with prices and don't know what it's worth.. Open to offers?
turbo back ( whole system from turbo ), cat back ( just a part of the system from cat/down pipe, mid section and back box ) any pictures would help as I'd like to know if there's resonator in the mid section and where it need to be weld
turbo back ( whole system from turbo ), cat back ( just a part of the system from cat/down pipe, mid section and back box ) any pictures would help as I'd like to know if there's resonator in the mid section and where it need to be weld
Hi Jay,
Do you have the wind deflectors (over the doors) available ?
If so; how much would you take delivered?
Where are you based mate, if not too far I could collect.
Sorry if I missed any info I'm your post ; I'm on my phone!
Thanks
Hi Jay,
Do you have the wind deflectors (over the doors) available ?
If so; how much would you take delivered?
Where are you based mate, if not too far I could collect.
Sorry if I missed any info I'm your post ; I'm on my phone!
Thanks
Hi how much for the seats and door cards and any pictures and what condition are there in. Cheers mark
Originally Posted by jaygarni
Looking for quick sales
I have a JDM WRX STI. unforantly the engine has packed up (big end) and I have no choice but to strip her down for parts. This is the first motor I have attempted to break so bare with me and Ill try my best. I looking to sell the bits as quick as possible as I need a new car.
so I will try and list as much as I can but feel free to ask if I miss any thing
ive tried to put the pictures up but have struggled a bit.. if you want to see any more just ping me a message and ill send them privately.
I'm open to offers on all parts (I have a rough idea on price so no chancers)
6 speed gear box and r180 diff (this will be sold with front and rear hubs, prop, cradle, all drive shafts and gear linkage) £1800
Block ( has a sheared bolt and needs machining) £80
Heads £500
VF30 turbo £275
coil pack
Incooler spray system
sti inlet and fuel rail
small engine loom
wiring loom
ecu with keys, door locks and boot lock
Miltek 3" exhaust (needs welding) £250 the way it is or £300 and ill get it welded
oil catcher tank
fuel pump
boost solenoid
MAF sensor
1st lambo sensor
rear lambo sensor
map sensor
crank sensor
front cam sensor
header tank
altenator
air con pump
air con radiator
radiator with fan
washer bottle and pump
speed line corse alloys 18" with toyo proxys £550
Brembo cailpers, with disc and pads
£700
anti lift kit £80
25 January 2016, 11:16 AM
BREAKING JDM WRX STI
