h4rry

iTrader: (3)

UPDATED 19th APRIL 2015 LISTING PARTS WHICH REMAIN.....


414bhp / 393 torque bug eye impreza breaking, I will get some fresh pics up shortly of the remaining itmes.

All parts available right down to the smallest screw or clip, just ask....

Autobahn88 FMIC with all pipework, hoses and heavy duty mikalor clamps (heavily tarnished due to being standing, and pipework not in best cosmetic condition but all fully functional) - £120 collected
http://s304.photobucket.com/user/sha...ml?sort=3&o=32
http://s304.photobucket.com/user/sha...ml?sort=3&o=33

Mild steel wrapped headers (Wrap could do with patching or replacing) - £70ono collected
http://s304.photobucket.com/user/sha...tml?sort=3&o=6
http://s304.photobucket.com/user/sha...tml?sort=3&o=7

Prodrive rear box with 3" rolled tailpipe - £80 collected
http://s304.photobucket.com/user/sha...ml?sort=3&o=12

Walbro 255 fuel pump - £50 posted

Anodised blue oil catch can - £20 posted
http://s304.photobucket.com/user/sha...ml?sort=3&o=26

Forge dump valve polished chrome - £30 posted
http://s304.photobucket.com/user/sha...ml?sort=3&o=29

Set of 4 290mm grooved discs to suit WRX calipers (Done approx. 3000 miles) - £50 collected
http://s304.photobucket.com/user/sha...ml?sort=3&o=13

Front WRX calipers (Which have been fully refurbished with new seals etc & fast road pads that have loads of meat left on them) - £40 collected

Rear WRX calipers (As fronts) - £30 collected

Set of 4 Goodrich braided brake lines £25 posted

Front strut brace polished chrome with sti pink mounting plates (Needs a good polish up) - £20 collected
http://s304.photobucket.com/user/sha...tml?sort=3&o=5

Standard WRX middle section exhaust (I have 2 of these!) £10 collected
http://s304.photobucket.com/user/sha...tml?sort=3&o=3

Standard WRX cat - £40 collected

Set of 3 gauges, Boost / Oil Pressure / Oil Temperature. These are all brand new, I have unpacked the and plumbed in the wiring then fitted into the bezels but this was done shortly after the car came off the road so they have never actually been used. £80 posted
http://s304.photobucket.com/user/sha...tml?sort=3&o=4

Denso 3 port boost solenoid with red vacuum hoses - £25 posted
http://s304.photobucket.com/user/sha...tml?sort=3&o=0
http://s304.photobucket.com/user/sha...tml?sort=3&o=1

Standard WRX dials reading approx. 68K miles from memory - £25 posted

Most interior plastics available - £Offers

Full WRX interior (2x front seats, rear bench set up & 4x door cards) - £100 collected

Bonnet (TBH this is knackard paint wise as it fell over in the wind but is dent free and just needs painting) - £20 collected

Standard WRX rear lights - £20 posted each

Transmission, the gearbox is knackard however the rest of the transmission is available. I have it off the car and am going to break it down and clean it up. Driveshafts, propshafts, center diff, rear diff etc - £Offers

I also have the sub frame off along with a few other cradles and brackets which again I plan on cleaning up and painting a random colour when I get the chance. If your interested, give me a shout and you can specify colour etc... £Offers

Finally, THE SHELL. Currently it is a rolling shell which is almost bare and is available as it stands if anyone may be interested. You will need to make arrangements to collect on a trailer. £Offers
http://s304.photobucket.com/user/sha...tml?sort=3&o=0

If the shell does not obtain any interested them I will have bits like alloy bottom arms, steering rack, hubs, anti roll bars and the like (All standard parts) which you are welcome to contact me should you need any of this.

All other car parts are available, exterior and interior. Just ask if there is something specific your after.

I will post larger items but you will need to cover postage.

Usual rules, first to pay secures item.... Thanks

fizzyo

iTrader: (1)

hi,

how about the fuelab fpr ?

thanks

h4rry

iTrader: (3)

Sorry sold. Will update list now.

h4rry

iTrader: (3)

BUMP..... offers please

Filski

What rims did you have on it mate?

ianbott

Hi mate, is the turbo stock location and how did it spool on the 2.5?
Cheers.

h4rry

iTrader: (3)

It was mapped with a shallow curve due to the gearbox so had no issues with lag mate, cannot say what it would be like mapped differently sorry.

h4rry

iTrader: (3)

I had replica prodrive pff7's fitted pal but they are sold sorry.

crazyspeedfreakz

iTrader: (92)

Hi bud, buy any chance do u have wrx boot lid or do u have a sti ??

h4rry

iTrader: (3)

Got the bootlid pal yes, no spoiler though.

crazyspeedfreakz

iTrader: (92)

I don't want the spoiler just the bootlid but it has to be a wrx boot lid, so it should only have about 5 holes on top if its a wrx bootlid,
if its a sti it will have about 12 or so ????

Can u confirm what u have ... Thanks

Broxi

iTrader: (11)

Lower C subframe?

h4rry

iTrader: (3)

It is a wrx lid but i had a high level spoiler on it so it has more holes sorry.

Yes got sub frame, what parts exactly do you need. Could you send photo or sketch?

h4rry

iTrader: (3)

Open to offers guys, need to clear my garage of the car asap.

Taking more bits off this morning.... Let me know if anything you want....

LeeG87

Good morning just wondering if you have a front and rear strut brace

Cheers Lee

h4rry

iTrader: (3)

BUMP...... Offers considered..... Keep 'em reasonable though.....

Engine coming out this weekend....!

bparkes007

Hi mate,

have you got the full suspension for it still?

Longer

Interested in the front bumper if its good condition. Pm'd you.

h4rry

iTrader: (3)

Replied ref front bumper cheers.

Still got the full suspension mate yes, its standard. Cheers

zippy!

iTrader: (1)

Does engine have avcs heads?

h4rry

iTrader: (3)

No avcs sorry pal

goodyegg

iTrader: (6)

What's the best you can do on fmic delivered ..? Can you pm me for faster reply

longone1981

tempted by engine seeing as mine has shat itself whats the best price you can do on it ?

h4rry

iTrader: (3)

Done a deal onthe enginethis week sorry pal. The guy is coming to get it tomorrow. Sorry but thanks.

*scoobygal*

Hi there have you still got the passenger front wing and what condition and price please .
Thankyou

Kaeo

iTrader: (1)

Price for all 4 struts?

Miztera

Is it an sti scoop? How much posted?

buxtonous

iTrader: (1)

has anyone heard from this guy since sending him money yet????

Nt11

iTrader: (1)

The oil catch can , can this be used on my 2009 Sti ? I mean does it come with hoses etc


Also the fmic will this fit ? As both 2.5??

Do you still have Perrin induction hose and maf holder

TypeR99

iTrader: (2)

Met him in person when I picked up some parts. He's manic busy and its a lot easier to ring him to sort what you need. Think he's been breaking it for months but barely sold anything as he just doesnt have the time, and he's been messed around on the few things he has sold.

He's a decent lad, just might not be the quickest to send out stuff. He's definitely no scammer.