help please
#1
Scooby Regular
Thread Starter
iTrader: (12)
Join Date: Sep 2004
Location: colchester
Posts: 7,226
Likes: 0
Received 0 Likes
on
0 Posts
help please
I re routed the defi controller and had to unplug them , the settings seem to be diff to how they was
so my question is what or how to get them back to what they was
iv got oil temp , oil pressure, boost
iv not got a manual on how to set up once installed
stu
so my question is what or how to get them back to what they was
iv got oil temp , oil pressure, boost
iv not got a manual on how to set up once installed
stu
#2
#3
Scooby Regular
Thread Starter
iTrader: (12)
Join Date: Sep 2004
Location: colchester
Posts: 7,226
Likes: 0
Received 0 Likes
on
0 Posts
I can't make head nod tail of that ;-(
there all working , just need to know
how to set up and do the peak thing
and the oil pressure one goes to 20 , then up and down with revs
also the boost one is very twitchy and not a smooth movement
any one ?????
there all working , just need to know
how to set up and do the peak thing
and the oil pressure one goes to 20 , then up and down with revs
also the boost one is very twitchy and not a smooth movement
any one ?????
#4
Essex Area Moderator
iTrader: (7)
Have you plugged them back into their correct sockets?
Worth double checking Stu.
To set Peak alarms.
Press "warn set" this will show all the gauges flashing but on will be flashing more rapidly than the others. This is the one you will now adjust by pressing the "up" and "down" keys.
Once on the value you want, just leave it and after 3-5 seconds, all dials will resume to normal mode.
Continue to press "warn set" to cycle through the gauges with the rapid flashing gauge being the one that will be adjusted.
Hope that helps.
Worth double checking Stu.
To set Peak alarms.
Press "warn set" this will show all the gauges flashing but on will be flashing more rapidly than the others. This is the one you will now adjust by pressing the "up" and "down" keys.
Once on the value you want, just leave it and after 3-5 seconds, all dials will resume to normal mode.
Continue to press "warn set" to cycle through the gauges with the rapid flashing gauge being the one that will be adjusted.
Hope that helps.