f.a.o cornelius
05 February 2006, 09:09 PM
#1
Scooby Regular
Thread Starter
f.a.o cornelius
paul any chance you could build and fit a flamer kit for me i am desperate try to make my own and it didn,t work so i thought i would leave it to a pro
please,please,please make it for me
lee
please,please,please make it for me
lee
05 February 2006, 10:10 PM
#2
GET IN LINE!!!!!!!!!!!!!!!!!!!
No prob mate, I've got a loads to make, a couple of guys from the Middlesex crew wants some, but I just haven't had the time due to work, to be honest, I've lost track who wants them now
1. Graham(Middlesex) x2
2. Scoobytoo
3. Frayz
4. 2000WRX
could everyone who wants a flamer put your name down please, the above list isn't in any particular order, though Graham will have the first 2
No prob mate, I've got a loads to make, a couple of guys from the Middlesex crew wants some, but I just haven't had the time due to work, to be honest, I've lost track who wants them now
1. Graham(Middlesex) x2
2. Scoobytoo
3. Frayz
4. 2000WRX
could everyone who wants a flamer put your name down please, the above list isn't in any particular order, though Graham will have the first 2
Got mine Thank you Cornelius,
06 February 2006, 04:40 PM
#4
Scooby Regular
Join Date: Apr 2005
Location: Basildon, Essex Scoobyless Crew - MX5 Division
Posts: 2,264
Likes: 0
Received 0 Likes
on
0 Posts
GET IN LINE!!!!!!!!!!!!!!!!!!!
No prob mate, I've got a loads to make, a couple of guys from the Middlesex crew wants some, but I just haven't had the time due to work, to be honest, I've lost track who wants them now
1. Graham(Middlesex) x2
2. Scoobytoo
3. Frayz
4. 2000WRX
5. Mark_b4
could everyone who wants a flamer put your name down please, the above list isn't in any particular order, though Graham will have the first 2
Don't forget me...
No prob mate, I've got a loads to make, a couple of guys from the Middlesex crew wants some, but I just haven't had the time due to work, to be honest, I've lost track who wants them now
1. Graham(Middlesex) x2
2. Scoobytoo
3. Frayz
4. 2000WRX
5. Mark_b4
could everyone who wants a flamer put your name down please, the above list isn't in any particular order, though Graham will have the first 2
Don't forget me...
06 February 2006, 06:10 PM
#7
It takes me around 2 hours to fit.
1. Remove backbox, clean flanges, drill 14mm hole on top of the tailpipe, screw in sparkplug and refit using fire gum.
2. Remove spare wheel, push out the grommet in the well, cut a hole in it and thread through the HT Lead, replace.
3. ground the black wire of the control box to a screw in the boot, connect the green wire to the -ve side of the ignition coil. thread the red wire through the back seats and under the lower door trim, under the dash to the centre console, also take a feed from the red wire to connect to the +ve side of the coil, replace spare wheel, screw it down so the coil mount is secured between the spare wheel and the bolt.
4. take dash apart so you can get to the cigarette lighter, take a feed from the centre connector and wire into the +ve side of the switch, take a black wire, and ground it to a screw somewhere by the handbrake, and connect to the -ve side of the switch, connect the control box to the +ve accesory side of the switch, replace everything and job done.
I include fitting instructions with the kit, which is more in depth, but this is just the basics
1. Remove backbox, clean flanges, drill 14mm hole on top of the tailpipe, screw in sparkplug and refit using fire gum.
2. Remove spare wheel, push out the grommet in the well, cut a hole in it and thread through the HT Lead, replace.
3. ground the black wire of the control box to a screw in the boot, connect the green wire to the -ve side of the ignition coil. thread the red wire through the back seats and under the lower door trim, under the dash to the centre console, also take a feed from the red wire to connect to the +ve side of the coil, replace spare wheel, screw it down so the coil mount is secured between the spare wheel and the bolt.
4. take dash apart so you can get to the cigarette lighter, take a feed from the centre connector and wire into the +ve side of the switch, take a black wire, and ground it to a screw somewhere by the handbrake, and connect to the -ve side of the switch, connect the control box to the +ve accesory side of the switch, replace everything and job done.
I include fitting instructions with the kit, which is more in depth, but this is just the basics
Trending Topics
07 February 2006, 09:14 AM
#9
Scooby Regular
Join Date: Jan 2006
Location: "Life may not be the party we hoped for, but while we are here we might as well dance.
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I would love to have one of these fitted...........
Can I be put on your list please ???
Im not in a rush so just when you can fit me in ??
How much does it cost to have it fitted etc ??
Many thanks
Jen
I would love to have one of these fitted...........
Can I be put on your list please ???
Im not in a rush so just when you can fit me in ??
How much does it cost to have it fitted etc ??
Many thanks
Jen
Thread
Thread Starter
Forum
Replies
Last Post