Fitting Sti 6 Front Splitter
#1
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: 310Nm oil burner....
Posts: 2,619
Likes: 0
Received 0 Likes
on
0 Posts
Fitting Sti 6 Front Splitter
Morning all
I've just bought an Sti 6 Front Splitter. I wouldn't normally ask a question like this but as I've only got a fitting window of 1 hour before it gets dark tonight I thought I would so that I can prepare myself / buy the bits I'll need on the way home
This morning I felt under the front bumper to see if there were any holes (I was in a rush to get to work and it was completely dark) but could not find any (they may be there though) LOL.
Are they there as standard?
But the main question is how have you fitted your splitters?
If there are no fitting holes pre moulded into the bumper I'm going the have to drill the holes but can't fit a drill between the road and the bumper to be able to used small M5 bolts.
Or have you used self tapping screws. Does seem as thought they may be able to vibrate loosse if this is the case (i.e. only held in place by srews).
RB5 286 = not ignoring your advice from last night mate, but I seem to remember you mentioned a combination of bolt holes and self tappers
Your thoughts would be much appreciated.
Xtreme & ABW = you are the guys with the experience of looking under / fitting these sorts of things. Any thoughts?
Cheers
I've just bought an Sti 6 Front Splitter. I wouldn't normally ask a question like this but as I've only got a fitting window of 1 hour before it gets dark tonight I thought I would so that I can prepare myself / buy the bits I'll need on the way home
This morning I felt under the front bumper to see if there were any holes (I was in a rush to get to work and it was completely dark) but could not find any (they may be there though) LOL.
Are they there as standard?
But the main question is how have you fitted your splitters?
If there are no fitting holes pre moulded into the bumper I'm going the have to drill the holes but can't fit a drill between the road and the bumper to be able to used small M5 bolts.
Or have you used self tapping screws. Does seem as thought they may be able to vibrate loosse if this is the case (i.e. only held in place by srews).
RB5 286 = not ignoring your advice from last night mate, but I seem to remember you mentioned a combination of bolt holes and self tappers
Your thoughts would be much appreciated.
Xtreme & ABW = you are the guys with the experience of looking under / fitting these sorts of things. Any thoughts?
Cheers
#3
Scooby Regular
If it helps , Mine is also screwed under the front bumper ( In the flat area ) Also where it returns by the inner wheel arch & Just to make sure & Cause my ole heavy Wrx is so fast , I Had it bonded on as well just for good measure
Tiny ...
Tiny ...
#4
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: 310Nm oil burner....
Posts: 2,619
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
Had a look in daylight and there are clearly holes there already (recessed) LOL
Trouble fitting was that there was very little hand room, so fitting the nuts was a nightmare! thought it would take me 45 mins!!!!!!
Took me 2 hours.
Didn't help the car being lowered 30mm either.
Anyway, all on now and it looks fantastic
You'll see it at the Shoot tomorrow (today) 12:25am
Good night
Had a look in daylight and there are clearly holes there already (recessed) LOL
Trouble fitting was that there was very little hand room, so fitting the nuts was a nightmare! thought it would take me 45 mins!!!!!!
Took me 2 hours.
Didn't help the car being lowered 30mm either.
Anyway, all on now and it looks fantastic
You'll see it at the Shoot tomorrow (today) 12:25am
Good night
Trending Topics
#9
alex,
where did you get just the lip from,
ive only seen the full side and bottom jobie's
that i cant be doing...
would take me 2 day's
many thank's
steve
p.s...looks nice mate..
thats why im askin...
where did you get just the lip from,
ive only seen the full side and bottom jobie's
that i cant be doing...
would take me 2 day's
many thank's
steve
p.s...looks nice mate..
thats why im askin...
#10
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: 310Nm oil burner....
Posts: 2,619
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by solosteve
alex,
where did you get just the lip from,
ive only seen the full side and bottom jobie's
that i cant be doing...
would take me 2 day's
many thank's
steve
p.s...looks nice mate..
thats why im askin...
where did you get just the lip from,
ive only seen the full side and bottom jobie's
that i cant be doing...
would take me 2 day's
many thank's
steve
p.s...looks nice mate..
thats why im askin...
You can buy them from a main dealer for £108 incl Vat + you'll need a fitting kit approx £10 from performance subaru or something similar!
#14
Scooby Regular
iTrader: (4)
Join Date: Jul 2001
Location: MSOC..........middlesex subaru owners club
Posts: 10,429
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VTEC to Turbo
Hot off the press
did you get the centre caps sorted?
or is that why the wheels are turned
budgie
#15
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: 310Nm oil burner....
Posts: 2,619
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by peter budgen
looking good alex
did you get the centre caps sorted?
or is that why the wheels are turned
budgie
did you get the centre caps sorted?
or is that why the wheels are turned
budgie
Sorry mate, I'm pretty sure I sent you a PM, did it not arrive?
Yes please to the centre caps. Let me know how you want payment
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM