2004 STI with b3 ECU help
#1
Scooby Newbie
Thread Starter
Join Date: Oct 2011
Location: london
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
2004 STI with b3 ECU help
Hi fellas got a quick question,I have a 2004 STI engine ready to fit into my 1976 VW Beetle these engines make a good alternative to the old air-cooled VW ones.
The question I have is will a B3 ECU do the job of running the engine ? I am no expert on engine management and any help and advise would be really helpful
The question I have is will a B3 ECU do the job of running the engine ? I am no expert on engine management and any help and advise would be really helpful
#3
Scooby Regular
iTrader: (7)
Hi there
If you want to swap the engine to yours 1976 VW Beetle you will need swap too engine loom etc.,its not straight swap on yours existing loom
Not sure on B3 ECU,from which car is this ECU,its from New age(01-07) or older classic,if its from classic this ECU can't control AVCS(this have yours 2004 STi engine)
Probably worth have look for other options like aftermarket ECU,with which will be easier to wire etc.
Jura
If you want to swap the engine to yours 1976 VW Beetle you will need swap too engine loom etc.,its not straight swap on yours existing loom
Not sure on B3 ECU,from which car is this ECU,its from New age(01-07) or older classic,if its from classic this ECU can't control AVCS(this have yours 2004 STi engine)
Probably worth have look for other options like aftermarket ECU,with which will be easier to wire etc.
Jura
#4
Scooby Newbie
Thread Starter
Join Date: Oct 2011
Location: london
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
hi thanks for the response Jura11.
I do have a compatible 2004 harness/loom ready for the instal i just need to know if the b3 ECU will run the 2004 STI ? I will eventually be using simtek but I just need to get it up and running for the moment.
I do have a compatible 2004 harness/loom ready for the instal i just need to know if the b3 ECU will run the 2004 STI ? I will eventually be using simtek but I just need to get it up and running for the moment.
#6
Scooby Regular
iTrader: (7)
Hi there
Not sure,but if B3 ECU(which is from few infos from GC8/GF8) is from Classic(GC8/GF8 92-00) this can be little bit more difficult just yours loom/harness is for New age and not for classic
Probably better will be find the ECU which is from New age(GD/GG 2000-2007) and you can use yours loom/harness etc
Jura
Not sure,but if B3 ECU(which is from few infos from GC8/GF8) is from Classic(GC8/GF8 92-00) this can be little bit more difficult just yours loom/harness is for New age and not for classic
Probably better will be find the ECU which is from New age(GD/GG 2000-2007) and you can use yours loom/harness etc
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM