Code P420.
#2
Scooby Regular
iTrader: (7)
Hi there
Think yours Lambda is gone/knackered,but without the removing and checking is just guessing
If its your car mapped,you can contact your mapper which can check and remove this CEL,but for now you will have bad MPG with this fault for now
If its knackered would recommend replace
Jura
Think yours Lambda is gone/knackered,but without the removing and checking is just guessing
If its your car mapped,you can contact your mapper which can check and remove this CEL,but for now you will have bad MPG with this fault for now
If its knackered would recommend replace
Jura
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2011
Location: Rotherham
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Cheers. I openport map my own car. I have just been reading up on the P0420 code. I am first going to clear the code with my scanner, then see if it comes back. If it does maybe a denso sensor is due or maybe a new downpipe, i say that as my exhaust seems louder ( maybe more free flow through the Sti sports cat ?. Yeah i can turn the light off myself no prob, but my car will prob fail the MOT in October due to high emissions.
Last edited by madmarx; 19 August 2012 at 11:07 AM.
#4
Scooby Regular
iTrader: (7)
Yes if you can clear the code with the your scanner and after you will see.
Decatted DP will flow more than any sport cat,with the decatted exhaust you can pass MOT,but seems only on few of them,but in general decat exhaust will not pass MOT
I think in the Romraider is option to disable this error to coming up
Jura
Decatted DP will flow more than any sport cat,with the decatted exhaust you can pass MOT,but seems only on few of them,but in general decat exhaust will not pass MOT
I think in the Romraider is option to disable this error to coming up
Jura
#5
I had this on mine after fitting the 2nd decat, some are lucky and it doesn't flag the cel (my previous WRX PPP didn't) but doesn't necessarily mean there's a problem at all.
If you can opensource map, it's easy just to turn off on the fault code tab of romraider as Jura said.
If you can opensource map, it's easy just to turn off on the fault code tab of romraider as Jura said.
#6
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2011
Location: Rotherham
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
I had this on mine after fitting the 2nd decat, some are lucky and it doesn't flag the cel (my previous WRX PPP didn't) but doesn't necessarily mean there's a problem at all.
If you can opensource map, it's easy just to turn off on the fault code tab of romraider as Jura said.
If you can opensource map, it's easy just to turn off on the fault code tab of romraider as Jura said.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM