Duel map and als switch help!
#1
Scooby Newbie
Thread Starter
Join Date: May 2016
Location: Northampton
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Duel map and als switch help!
Hi chaps getting the final bits together before I'm off to TDR in Warwick for a remap, I've opted for the duel maps (high/low) and als with launch if possible. My predicament is I don't fancy the high boost mode on the heated rear screen and I've already said I will put my own switch in for the als, so I was thinking a couple of the fighter pilot style toggle switches some where. Does anyone know what switches I would need I.e 2 pin or 3 pin switches? And I'm guessing both just standard on/off will do? Wanted to get them put in ready for the guys to just hook them up. Thanks in advance for any help 👍🏻.
#3
Scooby Regular
iTrader: (3)
yes if they are doing it with carberry on the standard ECU then a 2pin switch will do the job. The ALS doesn't have to be mega agressive (it probably won't be if your not fitting a throttle kick) so you can have some mild settings in there for more of a lights and sound effect than actually making positive pressure when you let off the pedal.
#4
Scooby Newbie
Thread Starter
Join Date: May 2016
Location: Northampton
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
yes if they are doing it with carberry on the standard ECU then a 2pin switch will do the job. The ALS doesn't have to be mega agressive (it probably won't be if your not fitting a throttle kick) so you can have some mild settings in there for more of a lights and sound effect than actually making positive pressure when you let off the pedal.
Awesome thanks for your help mate, il get a couple of those then 👍🏻. It's being done with the carberry your right so will be mainly for lights and sounds (will probably get shunned for admitting that). Thanks again