Notices
Engine Management and ECU Remapping This section is to discuss the various aspects of engine management modification for your Subaru.

Sti hatch maf g/s on idle

Thread Tools
 
Search this Thread
 
Old Feb 27, 2016 | 06:00 PM
  #1  
Lee225's Avatar
Lee225
Thread Starter
Scooby Regular
10 Year Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 300
Likes: 1
From: Wilts
Default Sti hatch maf g/s on idle

Hi
Can anyone tell me what g/s my sti hatch 09 should read on the maf on idle? A mechanic plugged my car in to his reader earlier and he said the reading seemed low on idle, the reading was 3.7g/s
Thanks
Reply
Old Feb 29, 2016 | 09:57 AM
  #2  
bludgod's Avatar
bludgod
Scooby Regular
15 Year Member
Liked
iTrader: (3)
 
Joined: Feb 2007
Posts: 1,879
Likes: 24
From: Belfast
Default

just checking an old logfile here and I'm seeing between 2.9 and 3.87 g/s so 3.7g/s should be grand.
Reply
Old Feb 29, 2016 | 05:52 PM
  #3  
Lee225's Avatar
Lee225
Thread Starter
Scooby Regular
10 Year Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 300
Likes: 1
From: Wilts
Default

Hopefully the maf won't need replacing then. Thanks for the info.
Reply
Old Feb 29, 2016 | 08:02 PM
  #4  
bludgod's Avatar
bludgod
Scooby Regular
15 Year Member
Liked
iTrader: (3)
 
Joined: Feb 2007
Posts: 1,879
Likes: 24
From: Belfast
Default

wouldn't trust the idle reading to tell you if the MAF is good or not, ideally do a run on boost with the wideband hooked up and check that the actual fuel target is meeting the primary open loop fuel target from the MAP - that's the only way to be sure.
Reply
Old Feb 29, 2016 | 08:14 PM
  #5  
Lee225's Avatar
Lee225
Thread Starter
Scooby Regular
10 Year Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 300
Likes: 1
From: Wilts
Default

I'll check that at the weekend. The reason I'm doing this is coz I'm getting fluttering noise and the car seems to hold back on boost in 5th and 6th gear. Someone said it was compressor surge due to the cold weather, but it still did it when the weather warmed up a bit. Someone else said it could be the maf causing this.
Reply
Old Feb 29, 2016 | 08:39 PM
  #6  
bludgod's Avatar
bludgod
Scooby Regular
15 Year Member
Liked
iTrader: (3)
 
Joined: Feb 2007
Posts: 1,879
Likes: 24
From: Belfast
Default

what's your boost level looking like and are there any modifications to the car?
Reply
Old Feb 29, 2016 | 08:48 PM
  #7  
Lee225's Avatar
Lee225
Thread Starter
Scooby Regular
10 Year Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 300
Likes: 1
From: Wilts
Default

I don't know what it's boosting at. It's had a full forged rebuild, sc36 turbo, induction kit, sports cat, had a remap and I have a print out saying its 344 bhp. I was also told it may need mapping again but I don't want to pay out for a remap if it's just a sensor playing up.
Reply

Trending Topics

Old Feb 29, 2016 | 08:53 PM
  #8  
bludgod's Avatar
bludgod
Scooby Regular
15 Year Member
Liked
iTrader: (3)
 
Joined: Feb 2007
Posts: 1,879
Likes: 24
From: Belfast
Default

if the turbo is sucking in more air than the engine can consume then you'll get some very strange sound effects from it - normally would happen if you have a full set of silicone intake pipes to go with the induction kit and it's not handling the colder temps too well (overshooting a tiny bit). Might be worth pinging the mapper to see if they could give it a quick onceover with the laptop - shouldn't be the same cost as a full remap to cast their eye over it.
Reply
Old Feb 29, 2016 | 09:00 PM
  #9  
Lee225's Avatar
Lee225
Thread Starter
Scooby Regular
10 Year Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 300
Likes: 1
From: Wilts
Default

It was remapped by scoobyclinic when the previous owner had the work done. I asked a mapper local to me if he'd give it the once over, he said he would only do a full remap and not a quick adjustment of boost etc. It has Perrin silicone intake pipes
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jonnyboy82
Wheels And Tyres For Sale
7
Jun 26, 2016 08:59 PM
plenty
Subaru Parts
8
Mar 1, 2016 12:11 AM
mdowens
Subaru
7
Feb 17, 2016 06:11 PM
j4meswrx
Subaru Parts
4
Feb 8, 2016 08:12 PM
scoobyman2007
Engine Management and ECU Remapping
4
Feb 8, 2016 09:32 AM




All times are GMT +1. The time now is 07:47 AM.